Owner's Manual - Infiniti Owner Portal - Infiniti USA

the system, push the Forest button
.
manually. (The indicator light on the
Forest button will illuminate.)
The air flow control is not available in
the front defroster mode. When the
“ ” button is pushed while the
Forest Air ® system is turned on, the
Forest Air ® system will turn off.
Operating tips
Breeze Mode:
When this mode is ON, fan speed fluctuates
during the Forest Air ® system
operation, creating a wind breeze similar
to a natural breeze using a combination of
the upper ventilator and the center ventilators
at random.
. Breeze Mode will activate after the
temperature of the passenger compartment
becomes suitable.
. This function will not operate immediately
after the engine starts.
. Breeze Mode will activate when the air
flow mode is in the “
mode.
” and “ ”
. This function will turn off if the fan
speed or a ventilator outlet is manually
adjusted.
4-44 Monitor, climate, audio, phone and voice recognition systems
. The breeze patterns may change in
accordance with the amount of sun
load.
. When operating fan speed or air flow
control while the Forest Air ® system is
turned on, the “ ” indicator light on
the button will turn off automatically,
and the Breeze Mode function will turn
off.
. When the Breeze Mode function is
turned off while the Forest Air ® system
is on, the Breeze Mode function will
remain off until the “ ” Forest button
is turned off and on again.
Outside odor and exhaust gas detection
sensor:
This vehicle is equipped with an outside
odor and exhaust gas detection sensor.
When the automatic intake air control is
on, the sensor detects odors and exhaust
gas, and then the system automatically
changes from the outside air circulation
mode to the recirculation mode. When the
“ ” Forest button is pushed, the outside
odor and exhaust gas detection sensor will
turn on.
When the Forest Air ® system is on, for the
first 40 seconds, the recirculation mode is
selected to prevent dust, dirt and pollen
from entering the vehicle, and the system
cleans the air inside of the vehicle with
Plasmacluster ® ion that are emitted from
the ventilator. After 40 seconds, the outside
odor and exhaust gas sensor activates
and automatically alternates between the
recirculation mode and outside air circulation
mode.
. The outside odor and exhaust gas
detection sensor detects industry odors
such as pulp or chemicals, and exhaust
gas such as gasoline or diesel.
Inside Air Quality sensor:
This vehicle is equipped with an inside air
quality sensor. When the sensor detects
odor in the cabin, the system increases the
fan speed automatically. When the Forest
Air ® system is on, the inside air quality
sensor will turn on. This function may not
work during the first 5 minutes after the
engine is started because the system is
still warming up.
. The Outside/Inside Air Mix function will
turn off when the air recirculation and
outside air circulation modes are changed
manually. When the Outside/Inside
Air Mix function is not active, turn off
and on the Forest Air ® system, the
Outside/Inside Air Mix function will