04.08.2013 Views

Owner's Manual - Infiniti Owner Portal - Infiniti USA

Owner's Manual - Infiniti Owner Portal - Infiniti USA

Owner's Manual - Infiniti Owner Portal - Infiniti USA

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SSS0640<br />

Forward-facing (front passenger seat) —<br />

step 1<br />

Refer to all Warnings and Cautions in the<br />

“Child safety” and “Child restraints” sections<br />

before installing a child restraint.<br />

Follow these steps to install a forwardfacing<br />

child restraint using the vehicle seat<br />

belt in the rear seats or in the front<br />

passenger seat:<br />

1. If you must install a child restraint in<br />

the front seat, it should be placed in a<br />

forward-facing direction only. Move the<br />

seat to the rearmost position. Child<br />

restraints for infants must be used in<br />

the rear-facing direction and, therefore,<br />

must not be used in the front seat.<br />

1-32 Safety — Seats, seat belts and supplemental restraint system<br />

2. Position the child restraint on the seat.<br />

Always follow the child restraint manufacturer’s<br />

instructions.<br />

The back of the child restraint should<br />

be secured against the vehicle seatback.<br />

If necessary, adjust or remove the head<br />

restraint or headrest to obtain the<br />

correct child restraint fit. If the head<br />

restraint or headrest is removed, store<br />

it in a secure place. Be sure to reinstall<br />

the head restraint or headrest when<br />

the child restraint is removed. See<br />

“Head restraints” earlier in this section<br />

or “Adjustable headrests” earlier in this<br />

section for head restraint or headrest<br />

adjustment, removal and installation<br />

information.<br />

If the seating position does not have an<br />

adjustable head restraint or headrest<br />

and it is interfering with the proper<br />

child restraint fit, try another seating<br />

position or a different child restraint.<br />

SSS0360B<br />

Forward-facing — step 3<br />

3. Route the seat belt tongue through the<br />

child restraint and insert it into the<br />

buckle until you hear and feel the latch<br />

engage. Be sure to follow the child<br />

restraint manufacturer’s instructions<br />

for belt routing.<br />

If the child restraint is equipped with a<br />

top tether strap, route the top tether<br />

strap and secure the tether strap to the<br />

tether anchor point (rear seat installation<br />

only). See “Installing top tether<br />

strap” later in this section. Do not<br />

install child restraints that require the<br />

use of a top tether strap in seating<br />

positions that do not have a top tether

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!