Owner's Manual - Infiniti Owner Portal - Infiniti USA

activate again.
Auto humidity control:
The sensor installed on the upper side of
the windshield detects the temperature
and humidity of the passenger compartment
and the surface of the windshield,
and controls the humidity of the passenger
compartment to not be over-dry or moist
enough to fog the windows. Moreover, it
detects potential fog before formation on
the windows and operates to remove it.
. Push the “AUTO” or “ ” Forest button
(The “AUTO” or “ ” indicator light on
.
the button will illuminate and “AUTO
DEF” will appear on the display.)
The “Auto humidity control” function
will not operate if the fan speed or a
vent outlet is manually adjusted.
(“AUTO DEF” will disappear from the
display.)
. When auto humidity control is turned
off while the Forest Air ® system is on,
turn off and on the Forest Air ® system,
the auto humidity control will activate
again.
SAA2961
Setting Forest Air ®
1. Push the “CLIMATE” button on the
instrument panel and turn the display
to the “CLIMATE mode” screen.
2. Select the “Forest Air Setting” key.
The Forest Air ® system settings screen
is displayed.
. No settings, except for auto humidity
control, are available unless the “ ”
indicator light on the button illuminates.
Breeze Mode ON/OFF:
When this item is turned to ON, the Breeze
Mode function will activate while the Forest
Air ® system operates.
Fan Speed Variance:
Set the Breeze Mode fluctuation effect.
Select the “Fan Speed Variance” key and
select the “High” or “Low” key setting of
the Breeze Mode fluctuation effect.
Setting the fan speed to “High” allows a
larger fluctuation change.
Outside/Inside Air Mix:
This item allows the user to set priority
between the outside air circulation and air
recirculation modes.
Select the “Outside/Inside Air Mix” key
and use “ ” or “ ” key to adjust
priority.
Greater priority will be given to the air
recirculation mode when the indicator is
closer to “ ”, and the outside air
circulation mode when the indicator is
closer to “ ”.
Auto Defogging Sensitivity:
This item allows the user to set the timing
of the automatic defogging activation
function.
Monitor, climate, audio, phone and voice recognition systems 4-45