Owner's Manual - Infiniti Owner Portal - Infiniti USA

Tire and Loading Information label
*1 Seating capacity: The maximum
number of occupants that can be
seated in the vehicle.
*2 Vehicle load limit: See “Vehicle
loading information” in the “9.
8-36 Maintenance and do-it-yourself
SDI2567
Technical and consumer information”
section.
*3 Original size: The size of the tires
originally installed on the vehicle
at the factory.
*4 Cold tire pressure: Inflate the
tires to this pressure when the
tires are cold. Tires are considered
COLD after the vehicle has
been parked for 3 or more hours,
or driven less than 1 mile (1.6
km) at moderate speeds. The
recommended cold tire inflation
is set by the manufacturer to
provide the best balance of tire
wear, vehicle handling, driveability,
tire noise, etc., up to the
vehicle’s GVWR.
*5 Tire size — see “Tire labeling”
later in this section.
*6 Spare tire size or compact spare
tire size (if so equipped)