Owner's Manual - Infiniti Owner Portal - Infiniti USA

1. Vehicle-to-vehicle distance control
mode
2. Conventional (fixed speed) cruise control
mode
Push the MAIN switch *A to choose the
cruise control mode between the vehicleto-vehicle
distance control mode *1 and
the conventional (fixed speed) cruise control
mode *2 .
To choose the vehicle-to-vehicle distance
control mode *1 , quickly push and release
the MAIN switch *A . To choose the
conventional (fixed speed) cruise control
mode *2 , push and hold the MAIN switch
*A for longer than approximately 1.5
SSD0976
seconds.
Once a control mode is activated, it cannot
be changed to the other cruise control
mode. To change the mode, push the MAIN
switch once to turn the system off. Then
push the MAIN switch again to turn the
system back on and select the desired
cruise control mode.
Always confirm the setting in the Intelligent
Cruise Control system display.
For the vehicle-to-vehicle distance control
mode, see the following description. For
the conventional (fixed speed) cruise control
mode, see page “Conventional (fixed
speed) cruise control switch” later in this
section.
SELECTING THE VEHICLE-TO-VEHI-
CLE DISTANCE CONTROL MODE
To choose the vehicle-to-vehicle distance
control mode *1 , quickly push and release
the MAIN switch *A .
VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE
In the vehicle-to-vehicle distance control
mode, the Intelligent Cruise Control (ICC)
system automatically maintains a selected
distance from the vehicle traveling in front
of you according to that vehicle’s speed
(up to the set speed), or at the set speed
when the road ahead is clear.
With ICC, the driver can maintain the same
speed as other vehicles without the constant
need to adjust the set speed as you
would with a normal cruise control system.
Starting and driving 5-49