Owner's Manual - Infiniti Owner Portal - Infiniti USA

. The Dual control mode cannot be
activated when the air conditioner is
in the front defrosting mode “ ”.
Automatic upper ventilator system:
1. Push the “CLIMATE” button to on.
2. Select the “Upper Vent” key and the
indicator on the screen will illuminate.
The air flow against the driver’s or
passenger’s upper body becomes gentle.
In this mode, air from the center
ventilators flows both straight and
upward in order to control the cabin
temperature without blowing air directly
on the occupants.
Distribution between straight and upward
flows is determined automatically by the
climate control system. If you prefer strong
air flow against your upper body, select
“Upper Vent” key to turn the indicator off.
. When the outside temperature decreases
to approximately 148F
(−108C), the “Upper Vent” function
does not activate. The “Upper Vent”
function reactivates automatically when
the ambient temperature is 148F
(−108C) or more.
Display Forest Air ® system setting screen:
The “Forest Air setting” screen will appear
when selecting the “Forest Air Setting” key.
For the details about the Forest Air ®
system setting operation, see “Setting
Forest Air ® ” later in this section.
Display Forest Air ® Information screen:
The Forest Air ® system information screen
will appear when selecting the “Forest Air
Info” key.
For details about the Forest Air ® system
information screen, see “Forest Air ® system
Information” later in this section.
FOREST AIR ® (if so equipped)
The Forest Air ® system keeps the air inside
the vehicle clean using the automatic air
intake system and automatic ventilation.
The Forest Air ® system also makes the
inside of the vehicle more comfortable,
using a combination of the upper ventilator
and center ventilators at random.
*Forest Air ® is a trademark of Nissan Motor
Co., Ltd.
Main operation
Push the “ ” Forest button.
(The “ ” and “AUTO” indicator light on
the button will illuminate.)
When the following functions and sensors
are turned on, the Forest Air ® settings will activate.
system
. Breeze Mode
. Outside odor and exhaust gas detection
sensor
. Inside Air Quality sensor
. Auto humidity control
The fan speed and air flow is automatically
set to the AUTO position.
. The Forest Air ® system can be adjusted
and/or activated/deactivated for each
function. For details of The Forest Air ®
system settings, see later in this
section.
. When the “ ” Forest button is
.
pushed while the air conditioner is
off, the air conditioner will automatically
activate.
When the outside temperature decreases
to approximately 328F (08C),
the outside odor and exhaust gas
detection sensor and auto humidity
control functions will not operate. The
system will not be reactivated automatically
even if the outside temperature
reaches 328F (08C). To reactivate
Monitor, climate, audio, phone and voice recognition systems 4-43