04.08.2013 Views

Owner's Manual - Infiniti Owner Portal - Infiniti USA

Owner's Manual - Infiniti Owner Portal - Infiniti USA

Owner's Manual - Infiniti Owner Portal - Infiniti USA

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

5-58 Starting and driving<br />

SSD0983<br />

When the COAST/SET switch is pushed<br />

under the following conditions, the system<br />

cannot be set.<br />

A warning chime will sound and the ICC<br />

indicators will blink.<br />

. When the drive mode select switch is<br />

turned to the SNOW mode (To use the<br />

ICC system, turn the drive mode select<br />

switch to a mode other than the SNOW<br />

mode, push the MAIN switch to turn off<br />

the ICC and reset the ICC switch by<br />

pressing the MAIN switch again.)<br />

For details about the INFINITI drive<br />

mode selector, see “INFINITI drive mode<br />

selector” earlier in this section.<br />

. When the VDC system is off (To use the<br />

ICC system, turn on the VDC system.<br />

Push the MAIN switch to turn off the ICC<br />

system and reset the ICC switch by<br />

pushing the MAIN switch again.)<br />

For details about the VDC system, see<br />

“Vehicle Dynamic Control (VDC) system”<br />

later in this section.<br />

. When ABS or VDC (including the traction<br />

control system) is operating<br />

. When driving into a strong light (for<br />

example, sunlight)<br />

. When a wheel is slipping (To use the ICC<br />

system, make sure the wheels are no<br />

longer slipping. Push the MAIN switch<br />

to turn off the ICC, and reset the ICC<br />

system by pushing the MAIN switch<br />

again.)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!