E9 to E28 NKR Service Manual.pdf - Industrial Air
E9 to E28 NKR Service Manual.pdf - Industrial Air
E9 to E28 NKR Service Manual.pdf - Industrial Air
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
11.2.4 Connect the Cable <strong>to</strong> the Indoor Unit<br />
1 The inside and outside connecting cable can<br />
be connected without removing the front grille.<br />
2 Connection cable between indoor unit and<br />
outdoor unit shall be approved<br />
polychloroprene sheathed 4 x 1.5 mm 2 flexible<br />
cord, type designation 245 IEC 57 or heavier<br />
cord.<br />
3 Bind all the indoor and outdoor connecting<br />
cable with tape and route the connecting<br />
cable via the escapement.<br />
4 Remove the tapes and connect the<br />
connecting cable between indoor unit and<br />
outdoor unit according <strong>to</strong> the diagram below.<br />
5 Secure the connecting cable on<strong>to</strong> the control board with the holder (clamper).<br />
o Ensure the colour of wires of outdoor unit and the terminal Nos. are the same <strong>to</strong> the indoor’s<br />
respectively.<br />
o Earth wire shall be Yellow/Green (Y/G) in colour and longer than other AC wires for safety reason.<br />
67
Change language