Todo List for COLTRIMS setup: - AMOS Experiment at LBNL

63 Check for Alcatel ACP20 (found in the dumpster) with Evan again:
Totti – can not be repaired ;-(
64
Software upgrades on computers: COBOLD, SIMION and Compilers:
Markus orders; hopefully done by Oct. 15. Compiler arrived and was
installed on Markus and Christians computer.
65 Check and get Kwikflange (Hoses, clamps, rings…) and Swagelok
(valves, bending tool…): Felix and Totti
66 Connect printer to acquisition computer and get new cartridges: Felix
and Totti. Totti installed the printer; cartridges are new but print heads
are bad. Too expensive to replace. Buying a new printer (150$) is
cheaper (low priority)
Spring
2008
Winter
2008
Spring
2008
Summer
2008
67 Put pumps on wheels: Felix Spring
2008
68 Make a jet test with the roots pump: Felix and Totti Spring
2008
69 Repair chamber ion gauge and cable: Felix and Sun Spring
2008
End of 2-Bunch-Run 3/2008
70 Get Electronics Rack from ALS (sector 10): Sun, Totti and Steve
Cooper
71 Get electronics (Powersupply, CFD, NIM bins) from repair: Totti (one
CFD is still in repair). Done
Spring
2008
Summer
2008
72 New phosphor screen: Sun and Felix Summer
2008
73 Mark more tools with pink dot: Sun, Totti and Felix Summer
2008
74 What should we do with the Hex-Anode ? Totti, Reinhard, Lothar. Has
to be replaced with new one. Markus brought it.
75 Adapters for differential stage need taped holes for center piece of the
tube. Sun and Felix
Summer
2008
Summer
2008
6