VL-Z500E-T/S - Sharp Australia Support
VL-Z500E-T/S - Sharp Australia Support
VL-Z500E-T/S - Sharp Australia Support
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Basic Operations<br />
Basic Operations<br />
Camera Recording<br />
22<br />
Basic Operations<br />
Selecting the Camcorder Mode<br />
This camcorder includes functions for use as both a<br />
video camera for recording and playing back images<br />
on tapes and as a digital still camera for recording and<br />
playing back still images on cards. One of the following<br />
camcorder modes needs to be set before starting any<br />
operation.<br />
Camcorder modes<br />
Tape Camera mode<br />
For recording motion and still images on<br />
a tape.<br />
1 Set the Media<br />
Selection switch to V.<br />
2 Hold down the Lock<br />
button and set the<br />
Power switch to v.<br />
Card Camera mode<br />
For recording still images on a card.<br />
1 Set the Media Selection<br />
switch to u.<br />
2 Hold down the Lock<br />
button and set the<br />
Power switch to v.<br />
Tape Playback mode<br />
For playing back or editing motion and still<br />
images recorded on a tape.<br />
1 Set the Media Selection<br />
switch to V.<br />
2 Hold down the Lock<br />
button and set the<br />
Power switch to w.<br />
Card Playback mode<br />
For playing back still images recorded on<br />
a card.<br />
1 Set the Media Selection<br />
switch to u.<br />
2 Hold down the Lock<br />
button and set the<br />
Power switch to w.<br />
Media Selection<br />
switch<br />
Power switch<br />
Lock button Lock button<br />
Lock button<br />
Lock button<br />
Notes:<br />
• To turn the power off, set the Power switch to OFF without pressing the Lock button.<br />
• Do not change the camcorder mode by operating the Media Selection switch during recording<br />
or playback, as this may cause damage to the tape or card.