VL-Z500E-T/S - Sharp Australia Support

Useful Features
Useful Features
32
Useful Features
Control Buttons
Operation button
Media Selection switch
Power switch
DISPLAY/MODE SET button
Operation button
Use the Operation button to select and set
the desired setting.
DISPLAY/MODE SET button
Each time you press the DISPLAY/MODE
SET button, the screen changes as shown
below.
• The example screens shown are for Tape
Camera mode.
Information
PAUSE display on
AUTO
3 0min
M ANUAL SET EXECUTE
FOCUS
AUTO FOCUS
BLC /GAIN
AUTO
3 0min
2 .
6. 2 0 0 5
1 0 : 3 0
PAUSE
SELECT SET
PAUSE
Mode screen
Information
display off
Using the Mode Screens
In the mode screens, you can adjust the
camcorder settings by using the Operation
button.
1 Set to the desired camcorder mode
by using the Media Selection switch
and the Power switch (see page 22).
• See pages 110 to 113 for the mode
items you can select in each
camcorder mode.
• Steps 2 to 4 show how to change the
SCENE MENU setting in Tape
Camera mode.
2 Press the DISPLAY/MODE SET
button until the mode screen appears.
M ANUAL SET
FOCUS
AUTO FOCUS
BLC/GAIN
3 Press l or m on the Operation
button to select the desired mode
item (SCENE MENU), then press the
centre of the Operation button.
Example
AUTO FOCUS
BLC/ GAIN
FADE
SCENE M ENU OFF
4 Press l or m to select the desired
mode setting (DUSK), then press the
centre of the Operation button.
Example
EXECUTE
AUTO FOCUS
BLC/ GAIN
FADE
SCENE M ENU DUSK
To turn off the mode screen
Press the DISPLAY/MODE SET button.
Note:
• Items that are not selectable are greyed out.