Manual tehnic automate cafea Saeco Group 200
Manual tehnic automate cafea Saeco Group 200
Manual tehnic automate cafea Saeco Group 200
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
- insert the key into the cover switch (see fig18)<br />
and wait for the column to position itself into<br />
the dispensing hole<br />
- load the other two columns which in the<br />
meantime have become reachable (fig31)<br />
- if you want to fill up the column near the cup<br />
conveyor, remove the holder retainer (fig32<br />
ref 1) and lean the whole cup dispenser as<br />
much as permitted (fig32 ref 2), complete<br />
the cup column loading and then put back the<br />
dispenser and the retainer<br />
”1”<br />
”2”<br />
fig32 fig34<br />
- replace the cover on the container<br />
684 Stirrer loading<br />
- Remove the counterbalance bar from the<br />
stirrer guides (fig33)<br />
fig33<br />
English<br />
- Introduce stirrers tightened with the band into<br />
the column; once they are on the bottom, cut<br />
the band and remove it (fig34)<br />
- put back the counterbalance bar (fig35) after<br />
completing the loading<br />
fig35<br />
- make sure stirrers have no seams, are not<br />
bent and all lay horizontally<br />
23
Change language