Manual tehnic automate cafea Saeco Group 200
Manual tehnic automate cafea Saeco Group 200
Manual tehnic automate cafea Saeco Group 200
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
- manually rotate using the wrench supplied<br />
with the machine until the lower filter is flush<br />
with the cup (fig 57)<br />
- unscrew screw (1) and replace filter (2)<br />
(fig57)<br />
- reassemble all the parts following the reverse<br />
order<br />
fig57<br />
Important<br />
Carefully blot the upper and lower filter and blow<br />
with compressed air<br />
93 Adjustments<br />
931 Dose and grinding<br />
adjustment<br />
The vending machine is delivered having<br />
standard values set by the manufacturer, in<br />
particular:<br />
- around 70 g of coffee powder<br />
In order to make the most of the product used,<br />
check the following:<br />
- ground coffee quantity adjustment Modify the<br />
quantity used by means of the two levels of<br />
adjustment:<br />
1- coarse adjustment: release the adjustment<br />
lever from the rack and place the dragging<br />
tooth of the inner bulkhead on one of the 4<br />
positions available, which indicate the basic<br />
quantity area (6 g – 7 g – 8 g – 9gr) (fig58A)<br />
A<br />
B<br />
fig58<br />
fig59<br />
English<br />
2- fine adjustment: engage the adjusting lever<br />
into the rack slot corresponding to the dose<br />
you require (fig58B)<br />
- coffee grinding adjustment Turn the rack<br />
(fig59) until you get the grinding After any<br />
adjustment three selections are necessary<br />
before the new setting becomes effective<br />
51
Change language