Manual tehnic automate cafea Saeco Group 200
Manual tehnic automate cafea Saeco Group 200
Manual tehnic automate cafea Saeco Group 200
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
English<br />
24<br />
7 - PAYMENT SYSTEM<br />
INSTALLATION<br />
71 Payment system installation<br />
on the machine<br />
The vending machine has no payment system<br />
The responsibility for possible damages to the<br />
machine and other objects and for personal<br />
injuries caused by an incorrect installation of the<br />
payment system falls on the person who installed<br />
the system<br />
- remove the cup dispenser<br />
- from the internal side of the door, cut the<br />
external film following the punched shape<br />
which corresponds to the desired cashless<br />
payment or coin validation system (fig 36)<br />
fig36<br />
- cut away plastic door joints by means of an<br />
hacksaw (fig37)<br />
fig37<br />
- after finishing the whole perimeter, install and<br />
secure the payment system<br />
- connect the payment system to the CPU card<br />
- reassemble the cup dispenser<br />
NOTE: a special interface card is required for<br />
connecting 12 Vcd coins validation systems to<br />
the CPU card<br />
- Then enter programming so as to choose<br />
convenient settings<br />
See section 8 ‘PROGRAMMING AND<br />
MAINTENANCE MENU’ in order to check<br />
parameter setting, which should be in line with<br />
the system used
Change language