24.08.2013 Views

Manual tehnic automate cafea Saeco Group 200

Manual tehnic automate cafea Saeco Group 200

Manual tehnic automate cafea Saeco Group 200

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

English<br />

CUP DISPENSER<br />

suitable for cups with 70-71 mm dia and for cups<br />

with 73 mm dia through an adequate release<br />

ring<br />

BOILER HEATING ELEMENTS<br />

armoured types:<br />

from 1,000 Watt for coffee boiler<br />

CONTAINER CAPACITY<br />

Coffee beans 20 Kg<br />

Instant coffee 06 Kg (instead of tea)<br />

Granular milk 085 Kg<br />

Chocolate 17 Kg (or 26)<br />

Tea 20 Kg<br />

Sugar 20 Kg<br />

Cups 195<br />

Stirrers 185<br />

8<br />

Data plate showing the minimum<br />

and maximum water pressure<br />

fig 4<br />

3 - SAFETY<br />

STANDARDS<br />

31 Foreword<br />

In compliance with the Machine Directive 98/37/<br />

EEC, Low Tension Directive 73/23/EEC and CE<br />

Marking Directive 93/68/EEC, the <strong>Saeco</strong><br />

International <strong>Group</strong> has drawn up a technical file<br />

on DA SG<strong>200</strong> E vending machine at its plants,<br />

acknowledging during the design phase the<br />

regulations listed in the Declaration of Conformity<br />

inside any vending machine<br />

32 General safety rules<br />

Warning<br />

- Before using the vending machine, read this<br />

manual carefully<br />

- Installation and maintenance must only be<br />

carried out by qualified technicians<br />

- For no reason whatsoever shall the operator<br />

reach those parts of the machine that are<br />

protected by guards requiring special<br />

instruments for removal<br />

- Good knowledge and absolute respect, from<br />

a technical point of view, of the safety<br />

standards and danger warnings contained in<br />

this manual, are imperative for installing,<br />

using, servicing and maintaining the machine<br />

in minimum minimum risk conditions<br />

Warning<br />

Always disconnect the POWER CABLE before<br />

servicing or cleaning the machine<br />

Under no circumstances neither service the<br />

machine, nor remove safety guards before hot<br />

parts have cooled down!

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!