Manual tehnic automate cafea Saeco Group 200
Manual tehnic automate cafea Saeco Group 200
Manual tehnic automate cafea Saeco Group 200
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
- Cup key<br />
It allows to enable or disable the key ‘beverage<br />
01’ (fig 39) as:<br />
1 - ‘No cup’: By pressing the No-CUP key before<br />
choosing a beverage allows to have it brewed<br />
without the cup<br />
After pushing the preselection key, the user has<br />
8 seconds to select the desired product After<br />
this time the preselection is cancelled<br />
2 - ‘Beverage 05’: in this case, by pressing this<br />
key the beverage 01 is brewed<br />
3 - ‘Disabled’: in this case, by pressing this key<br />
no beverage will be brewed<br />
- Reset validation<br />
It allows to ‘RESET’ the data in the maintenance<br />
menu (STATISTICS)<br />
- Language<br />
It allows to select the language to be used by<br />
the machine<br />
- Modify password<br />
It allows to set a password or to modify the set<br />
one The password consists of a number<br />
between 0001 and 65536 The 0000 value<br />
(default value) means no password To set the<br />
password, press the UP and DOWN keys and<br />
confirm using the ENTER key<br />
- Complete menu<br />
It allows to choose whether the entries of the<br />
programming menu should be shown entirely or<br />
only partially The least frequently used entries<br />
are highlighted by a frame outlined at 822 and<br />
can be shown only if in the data ‘Y’ is set in this<br />
function<br />
English<br />
PAYMENT SYSTEMS<br />
The entries of the PAYMENT SYSTEMS are:<br />
- Parallel coiner<br />
It allows you to enable the parameters of the<br />
parallel coiner, of the mechanical coiner, the<br />
cancelling machine and the choice of values to<br />
assign to the single money channels<br />
- Enable<br />
By setting ‘Y’, the control of the parallel coiner,<br />
the mechanical coiner and the cancelling<br />
machine is enabled<br />
By setting ‘N’, a parallel coiner possibly attached<br />
to the vending machine is disabled<br />
- Coin value<br />
It allows setting the value of the coins transferred<br />
to the vending machine from the parallel coiner,<br />
the mechanical coiner and the cancelling<br />
machine<br />
The following table shows the combinations<br />
channel/payment system<br />
Channel<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
Payment system<br />
Parallel coiner<br />
parallel coiner<br />
Parallel coiner<br />
Parallel coiner<br />
Parallel coiner<br />
Parallel coiner/mechanical<br />
coiner<br />
Canceling machine/mechanical<br />
coiner<br />
- Banknote Reader<br />
It enables the parameters of the parallel banknote<br />
validator and the choice of values to be assigned<br />
to individual note channels<br />
- Enable<br />
By setting “Y”, management of the parallel reader<br />
is enabled<br />
By setting “N”, a parallel banknote reader<br />
possibly connected to the vending machine is<br />
disabled<br />
- Inhibition Level<br />
It allows setting the active level of the banknote<br />
reader’s inhibition level<br />
37