Design and Specification Guidelines - Gaston County Schools
Design and Specification Guidelines - Gaston County Schools
Design and Specification Guidelines - Gaston County Schools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Design</strong> <strong>and</strong> <strong>Specification</strong> <strong>Guidelines</strong> <strong>Gaston</strong> <strong>County</strong> <strong>Schools</strong><br />
Updated: March 6, 2012 <strong>Gaston</strong>ia, NC 28054<br />
DIVISION 9: FINISHES<br />
A. General<br />
1. Attic Stock<br />
a) Items: VCT, ceramic tile, acoustical ceiling tile<br />
b) Items labeled by General Contractor<br />
c) Items to be stored at school<br />
d) <strong>Design</strong> for adequate custodial storage to house attic stock<br />
B. Acoustical Ceiling<br />
1. Grid 24” x 24” only<br />
2. Br<strong>and</strong>s<br />
a) Armstrong World Industries, Inc<br />
b) Celotex Corporation<br />
c) United States Gypsum<br />
3. Use moisture resistant, scrubbable acoustical ceiling tile in kitchens<br />
C. Paint<br />
1. Interior room surface average reflectance shall be 70%+ on ceilings <strong>and</strong> walls<br />
above 7 ft. <strong>and</strong> 50%+ on walls below 7 ft., or per ASHRAE “Advanced Energy<br />
<strong>Design</strong> Guide for K-12 School Buildings” – latest edition.<br />
2. Surface Type<br />
a) Oil paint on metal surfaces<br />
b) Latex on all other surfaces<br />
c) Br<strong>and</strong>s<br />
(1) Glidden / Devoe paint<br />
(2) Duron, Inc.<br />
(3) Sherwin Williams<br />
3. Colors – One (1) main color, one (1) accent color<br />
4. Alternate - Waterborne Epoxy for steel, aluminum, concrete, masonry, wood<br />
<strong>and</strong> wallboard<br />
a) Br<strong>and</strong>s<br />
(1) Glidden Paints; Devoe Coatings<br />
(2) Pittsburgh Paint; PPG Industries, Inc. (PPG).<br />
(3) Sherwin Williams; Industrial <strong>and</strong> Marine Coatings (S-W).<br />
(4) Tnemec Company, Inc. (Tnemec).<br />
D. Resilient Wall Base<br />
1. Rubber wall base – product complies with FS SS-W-40 Type 1<br />
2. Inside <strong>and</strong> outside corners to be pre-manufactured formed products<br />
3. Colors<br />
a) Brown<br />
b) Gray<br />
c) Black<br />
4. Do not use in restrooms<br />
*=Preferred Br<strong>and</strong>; Bid Alternate Required Page 13 of 38 Pages