Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PT / PG / PD REPAIR PT SERIES PUMPS 3<br />
3.19 Frame Assembly (cont.)<br />
Recommended tools:<br />
Socket wrench - 1/2" (13mm), 11/16" (17mm), 3/4" (19mm)<br />
Allen wrench - 6mm<br />
Removal:<br />
1. Remove hardware (1) mounting console (2) to<br />
shockmounts (3). Remove from frame.<br />
Note: Mounting hardware varies on all PT Series Pumps.<br />
2. Remove four screws (4), washers (5), and four locknuts<br />
(6) mounting engine side (7) to console.<br />
3. Remove two screws (8) and washers (9) mounting<br />
pump side (10) to console.<br />
Installation:<br />
1. Mount pump side (10) to console (2) using screws (8)<br />
and washers (9). Apply Loctite 243 or an equivalent<br />
medium strength threadlocker and torque to 28 ft.lbs<br />
(38 Nm).<br />
2. Mount engine side (7) to console (2) using screws<br />
(4), washers (5), and locknuts (6). Torque to 29 ft.lbs<br />
(40 Nm).<br />
3. Mount console (2) to shockmounts (3) using hardware<br />
(1).<br />
Note: See sealant and torque reference charts in back<br />
of book for appropriate threadlocking adhesives and<br />
torque values.<br />
WARNING<br />
Before you start the machine, ensure that all tools<br />
have been removed from the machine and that<br />
replacement parts and adjusters are firmly tightened.<br />
3-25