Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5 PD SERIES PUMPS PT / PG / PD REPAIR<br />
5.7 Cleaning Sediment Cup<br />
Turn fuel valve off. Remove sediment cup (a) and O-ring<br />
(b). Wash them thoroughly in a nonflammable solvent.<br />
Dry them and re-install. Turn fuel valve on and check for<br />
leaks.<br />
5.8 Adjusting Idle Speed<br />
To adjust idle speed:<br />
1. Start engine and allow it to warm up to normal operating<br />
temperature.<br />
2. Turn throttle stop screw (c) in to decrease speed, out<br />
to increase speed.<br />
5.9 Gear Case<br />
Check the oil level in the gear case once a week or every<br />
25 hours of operation.<br />
Remove oil level plug (e). Check that oil level is even with<br />
plug opening. If oil level is low, add oil through the top fill<br />
plug opening (d). Do not overfill.<br />
Change oil in gear case once a year or every 300 hours<br />
of operation.<br />
Drain oil through drain plug opening (f) at bottom of gear<br />
case. Add oil through fill plug on top of gear case.<br />
Oil capacity: 32 oz. (1000 ml) SAE 30<br />
5-6<br />
c<br />
e<br />
d<br />
b<br />
a<br />
1001SD13<br />
1017SD58<br />
f 1010SD50
Change language