Cables & - Hama

S144_155_(GB)_SAT2 22.07.2005 13:46 Uhr Seite 154
Antennas/SAT
WALL BRACKETS
Rafter Mast Cleat, galvanized
- High-quality welded and galvanized steel holder
- Long life and corrisions-resisting
- Two possibilities to install the mast with special
formtiles:
1. Together with pole-base (item no.44177) as variable
holder for an exact position of the mast
2. Two of these holders(please order 2x this item) as
holder-kit for direct mounting from outside, when an
installation on the loft is not possible.
( e.g. attic flat/converted loft)
- Variation of mast-installation up to 25 cm possible
- Universal for pipe-diameter up to 60 mm
- With screws and universal pole-clamp
- 1 pc packed in a carton
Item No. Qty BC
047486 6 –
WALL BRACKETS
Aluminum Stand "Tripod" for Satellite Dishes
- Ideal on firm soil, with adjustment of the stands to adjust
the pipe on uneven soil
- Diameter of pipe 50 mm, with masking cap
- 1 bore for attachment per stand
- Made of aluminium
- Long life and corrision resistant
- Demountable
- Length: 1 meter
Item No. Qty BC
Alu 047467 1 –
Steel Mast for satellite/antenna systems
- Diameter: outside: 48 mm, wall size of the tube: 2.5 mm
- Hot galvanized outside and inside - high corrosion
resistance
- Max. moment of flexion: 1160 Nm, installation according to
VDE 0855, part 1
- For extension, several masts can be fit together
- With slot against twisting
- Please order also fitting cover 47481
- Please note: In case of roof installation the satellite
disk/antenna and/or the mast must be connected to
the ground!
Length Item No. Qty BC
2.0 m 047480 4 –
Aluminium Railing Holder for
satellite/antenna systems
- For the mounting e.g. at solid balcony railings or railing
holding devices
- Suitable for horizontal or vertical holding devices,
max. thickness 35 mm
- Incl. aluminium mast tube of a length of 1.0 m, 40 mm Ø,
walll thickness 3 mm
- For satellite disks of max 80 cm Ø
MAST ACCESSORIES
Pole Seal for antennas/SAT-poles
- Made of Prewanol, self-welding
- For poles max. diameter 60 mm
- High-quality material for permanent, safe sealing on
lead-tiles, e.g. Hama no. 44187
Item No. Qty BC
047483 5 –
Item No. Qty BC
044188 6 35
Earth Spit for SAT dishes or sunshades
- For a quick easy installation of satellite dishes
- Ideal for garden and for camping
- Earth spit also for sunshades usable, because with
fixing screw
- Length 1 meter
- Diameter of tube 38 mm, with masking cap (detachable)
- Suitable for satellite dishes till 75 cm diameter
- Made of hot galvanized steel
- Long life and corrision-resistant
Screw-Kit with rawlplugs
- 4 screws, diameter 8 x 80 mm according to DIN 571
- 4 washers, diameter 8 mm according to DIN 9021
- 4 plastic rawlplugs, diameter 12 mm for solid material
(concrete, solid prick)
Item No. Qty BC
047479 6 –
Item No. Qty BC
044189 6 31
Stable Floor Stand for SAT Dishes, Dismountable
- Suitable for SAT dishes up to 60 cm diameter
- Ideal for temporary use
- Can be stabilized with a paving slab 50 x 50 cm
(not included)
- Can be additionally secured: 4 screwholes for fitting
to the ground
- Pipe diameter: 50 mm
- Height: 1.1 m
- Material: Aluminium
- Adjustable level
- Dismountable
Item No. Qty BC
Alu 047484 1 –
Lead Tile Set
- To fix a mast on roof for using e.g. a satellite- or a
terr.-antenna.
- For mast with 48 mm diameter and brick tile with a max.
measure of 30 cm width.
Set contains:
- Lead tile, measurements 320 x 400 mm
- Pole base, galvanized, with ground connection
- Pole clamp, galvanized
- Mast wristband, made of elastic plastic
- Sniffer pipe cap, made of plastic
- Includes 4 galvanized wooden screws to fix the mast
clamp on timber
Item No. Qty BC
Set 044197 1 –
154 Hama September 2005
BC = Blistercard