You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 10: Appendix<br />
Searching for a device code<br />
If you do not know the device code for a particular<br />
device, you can view each available code for that device<br />
mode and sample the functions to find the code that<br />
operates the target device.<br />
1 Press a mode select button on the remote.<br />
2 While holding down Q, press 8, 5, 0, 0. The<br />
remote control enters program mode.<br />
3 Point the remote at the target device. Press , 1,<br />
POWER<br />
, , or , and then press B or b to change a<br />
VOL CH<br />
code.<br />
4 If the device responds to the remote control:<br />
Press Q to store the device code. The remote exits<br />
program mode.<br />
5 If the device does not respond to the remote control:<br />
Repeat this step until the device responds to the<br />
remote.<br />
When no code is found, exit the program mode by<br />
the following operation:<br />
•Press Q. (current state is stored)<br />
•Press no key for 10 seconds. (current state is not<br />
stored)<br />
Note: When a search cycle is completed, the remote<br />
displays each available code again. If no key is pressed<br />
within 10 seconds, the remote exits program mode and<br />
returns to the previous code.<br />
To lock the remote’s volume keys to a specific mode:<br />
Example: CABLE/SAT mode<br />
1 Press CABLE/SAT.<br />
2 While holding down Q, press 8, 0, 0, 0.<br />
3 Press VOL (locked).<br />
The remote’s volume keys now operate the volume<br />
of the device associated with the CABLE/SAT<br />
mode, even when CABLE/SAT is not the current<br />
device mode.<br />
To unlock the remote’s volume keys:<br />
1 While holding down Q, press 8, 0, 0, 0.<br />
VOL<br />
2 Press . The CABLE/SAT mode is unlocked.<br />
Clearing the remote’s programming<br />
You can clear all programmed remote control features<br />
not related to “Device code setup” and reset the volume<br />
lock to the TV device mode.<br />
While holding down Q, press 8, 9, 0, 0.<br />
Resetting to the factory default<br />
You can clear changed manufacturing features.<br />
While holding down Q, press 8, 9, 0, 1.<br />
Locking the volume keys<br />
VOL<br />
The remote’s volume keys ( VOL , , and MUTE) are<br />
locked to a device mode.<br />
State<br />
Locked (default)<br />
Unlocked<br />
Locked to a<br />
specific device<br />
mode<br />
Meaning<br />
The remote operates the TV’s volume<br />
except the AUX mode, even when the<br />
TV is not the current device mode.<br />
The remote operates the volume of<br />
the device associated with the current<br />
device mode.<br />
Each device mode has its own volume<br />
(if the device ID has volume data).<br />
The remote operates the volume of<br />
the device associated with the locked<br />
mode, even when the locked mode is<br />
not the current device mode.<br />
Note: The AUX mode is not locked to<br />
other device modes.<br />
See “Operating other devices” (- p. 79).<br />
80