20111104_CN.12_complete_UK_LOW.pdf

CTE - CTSE 10 poles + m 16A - 500V
enclosures * ) :
size “57.27” page:
C-TYPE IP65/IP66 ................................... 222
C7 IP67 stainless steel lever ................ 255
V-TYPE IP65/IP66 stainless steel lever 264
T-TYPE IP65 insulating ........................ 283
JEI zinc-plated steel lever .................... 290
BIG hoods ...................................... 308 - 311
aggressive environments ....................... 330
EMC ........................................................ 349
*) only bulkhead mounted housing
- can be mated with CNE, CCE, CCS, CSE, CSH inserts
- inserts may be fitted from front of enclosure
description part No. part No. part No. part No.
side mounting (see page 125) left right
female inserts with female contacts 1) CTEF 10 L CTEF 10 R
male inserts with male contacts 1) CTEM 10 L CTEM 10 R
dimensions shown are not binding
and may be changed without notice
terminal block inserts terminal block inserts
screw terminal connection spring terminal connection
side mounting (see page 125) left right
female inserts with female contacts CTSEF 10 L CTSEF 10 R
male inserts with male contacts CTSEM 10 L CTSEM 10 R
1) for non-prepared conductors dimensions in mm
- characteristics according to EN 61984:
16A 500V 6kV 3 (CTE - CTSE)
16A 400/690V 6kV 2 (CTSE)
- UL, CSA, CCC, GOST certified (CTE)
- UL, CSA, CCC, GL, GOST certified (CTSE)
- rated voltage according to UL/CSA: 600V
- insulation resistance: ≥ 10 GΩ
- ambient temperature limit: -40 °C ... +125 °C
- are made of self-extinguishing thermoplastic resin
UL 94 V0
- mechanical life: ≥ 500 cycles
- contact resistance: ≤ 4 mΩ
- for maximum current load, see the following load
curves inserts, for more information see page 496
working current (A)
diagram CTSE 10 poles
16
14
12
10
8
6
4
2
1,0 mm2
0,5 mm 2
2,5 mm 2
1,5 mm 2
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130
ambient temperature (°C)
female inserts (CTEF and CTSEF) male inserts (CTEM and CTSEM)
40.7
contacts side (front view)
female inserts (CTEF and CTSEF) male inserts (CTEM and CTSEM)
left (L) right (R)
6 7 8 9 10
34
IN PREPARATION
1 2 3 4 5
terminal block side
82.5
6 7 8 9 10
1 2 3 4 5
- CTE inserts with plate, for section conductors:
0.75 - 2.5 mm 2 - AWG 18 - 14
- conductors stripping lenght: 12 mm
- torsion couple recommended for conductor fastening
screws see section feature of inserts on page 21 and
22
57
27
40.7
34
left (L) right (R)
1 2 3 4 5
6 7 8 9 10
terminal block side
82.5
1 2 3 4 5
6 7 8 9 10
- CTSE spring inserts for section conductors:
0.14 - 2.5 mm 2 - AWG 26 - 14
- conductors stripping lenght: 9...11 mm
connection with spring terminal
3.5x0.5 mm
57
27
127
CTE - CTSE