20111104_CN.12_complete_UK_LOW.pdf

special enclosures
372
CG - MG enclosures high protection IP68 version
inserts: page
CK ............................ 3 poles + m 40
CK ............................ 4 poles + m 40
CKS .......................... 3 poles + m 41
CKS .......................... 4 poles + m 41
CD** .......................... 8 poles 46
CQ ............................ 5 poles + m 69
CQ .......................... 12 poles + m 68
CJ KF......................................................
(can be used only in I/IAP enclosures)
441
CJ KM......................................................
(can be used only in hoods)
441
CX 1/2 BD................................................ 444
** to ensure IP68 protection rating with CD 08 insert,
purchase the kit CKR 65 D.In this case do not use
the screw supplied with the enclosure
insert dimensions: 21 x 21 mm
description part no.
bulkhead mounting housing CGK I
dimensions shown are not binding
and may be changed without notice
bulkhead mounting housing
EN 60529
IP68
IEC 60529 IP69K (compliant with DIN 40050-9)
dimensions in mm
ø 4,4
45,5
36,7
30
22,5
M4
23,5
32,5