20111104_CN.12_complete_UK_LOW.pdf

CH - CA and MH - MA enclosures size “57.27” 180 °C version
inserts: page
CNE RY .................. 10 poles + m 113
insert centre distance:
57 x 27 mm
description part no. entry part no. entry part no. entry part no. entry
Pg M Pg M
dimensions shown are not binding
and may be changed without notice
bulkhead and surface mounting hoods and cover
housings and cover
bulkhead mounting housing, with lever CHIR 10 —surface
mounting housing, with levers CHPR 10 16 MHPR 10.20 20
surface mounting housing, with levers, high construction CAPR 10.21 21 MAPR 10.32 32
cover with 4 pegs (for enclosures) CHCR 10
enclosure with pegs, side entry CHOR 10 16 MHOR 10.20 20
enclosure with pegs, side entry, high construction CAOR 10.21 21 MAOR 10.32 32
enclosure with pegs, top entry CHVR 10 16 MHVR 10.20 ** 20
enclosure with pegs, top entry, high construction CAVR 10.21 21 MAVR 10.32 32
cover with 2 levers (for hoods) CHCR 10 G
** can only be used with a complete cable gland (to
be purchased separately)
panel cut-out for bulkhead mounting housings in mm
EN 60529
IP65
IEC 60529
32
35
ø 4,5
65 83
Type
4/4X/12
dimensions in mm dimensions in mm
CHIR CHOR (CAOR) and MHOR (MAOR)
142
95,5
CHPR - CAPR and MHPR - MAPR CHVR (CAVR) and MHVR (MAVR)
135
Pg/M Pg/M
82
93,5
CHCR CHCR G
73 43
59
45,5 6
type A B C
CHPR / MHPR 57 40 52
CAPR / MAPR 74 45 57
59
B
C
12
Ø 5,5
4
29
A
73
73
Pg/M
43
Pg/M
43
73 43
142 59
52 (70)
58 (85)
17,5
355
180 °C - size 57.27