20111104_CN.12_complete_UK_LOW.pdf

More documents

Recommendations

Info

180 °C - overview characteristics Description 180 °C ENCLOSURE VERSION Series specifically developed for industrial applications where the ambient temperatures are particularly harsh (from -40°C to +180°C). These enclosures have supplementary insulating strips inside. For use with inserts in self-extinguishing thermoplastic material (PPS polyphenylene sulphide). This version is distinguished by the red colour of the enclosures. UL certified for USA and Canada for NEMA 4, NEMA 4X and NEMA 12 protection ratings, printed on the packaging. IP65, IP66 and IP69K protection ratings. Characteristics of materials used: - made of die cast aluminium alloy - chromate treated die cast - coated with special thermoset powder with high resistance to high temperatures - gaskets in anti-aging fluoro elastomer - locking device with levers, springs and pegs in stainless steel - monoblock lever handles in stainless steel (for CZ..R, CH..R 48 and MZ..R, MH..R 48 versions) - lever handles in aluminium with special die-cast coating (for CH..R 10, 16, 24 and MH..R 10, 16, 24 versions) - supplementary insulation inside enclosures 352
CK and MK enclosures size “21.21” 180 °C version inserts: page CK RY ...................... 3 poles + m 43 CK RY ...................... 4 poles + m 43 description part no. part no. part no. part no. (entry - Pg 11) (entry - M 20) (entry - Pg 11) (entry - M 20) dimensions shown are not binding and may be changed without notice straight and angled hoods bulkhead mounting housings with stainless steel lever 1) CKAXR 03 I without cable gland, stainless steel lever 1) CKAXR 03 IA with cable gland, stainless steel lever 1) CKAXR 03 IAP MKAXR IAP20 with cable gland, stainless steel lever 1) , bulkhead hole closed CKAXR 03 AP MKAXR AP20 with pegs, top entry 1) CKAR 03 V MKAR V20 with pegs, side entry 1) CKAR 03 VA MKAR VA20 with stainless steel lever, top entry 1) CKAXR 03 VG MKAXR VG20 panel cut-out for enclosures, in mm dimensions in mm dimensions in mm 22 ø 3,3 22 30 1) enclosures with IP44 protection rating. EN 60529 IP44 IP44 IEC 60529 Type 4/4X/12 CKAXR I CKAR V and MKAR V 50 30 24 33 Ø 3,3 CKAXR IA CKAR VA and MKAR VA 41,5 45 42,5 30 Ø 3,3 CKAXR IAP (CKAXR AP) and CKAXR VG and MKAXR VG MKAXR IAP (MKAXR AP) 41,5 11,5 (40,5) (12,5) 45 (43,5) 42,5 (40) 30 Pg 11 o M 20 Ø 3,3 33,5 33,5 33 60,5 53 51,5 Pg 11 o M 20 28 26,5 24 40,5 Pg 11 o M 20 Pg 11 o M 20 353 180 °C - size 21.21
Page 1 and 2:
Multipole connectors for industrial
Page 3 and 4:
general index introduction to the c
Page 5 and 6:
general enclosure index C-TYPE size
Page 7 and 8:
IMPORTANT NOTES ILME designs and ma
Page 9 and 10:
general overview MIXO series insert
Page 11 and 12:
connector guide CHOOSE YOUR CONNECT
Page 13 and 14:
general overview of the multipole c
Page 15 and 16:
general features of multipole conne
Page 17 and 18:
standards - connector inside a pane
Page 19 and 20:
standards Determination of creepage
Page 21 and 22:
general overview of the multipole c
Page 23 and 24:
insert features for multipole conne
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
conductor connections CSH Series Co
Page 33 and 34:
conductor connections removable cri
Page 35 and 36:
enclosure versions and applications
Page 37 and 38:
enclosure versions and applications
Page 39 and 40:
Web site The technical features of
Page 41 and 42:
Enclosures and inserts combinations
Page 43 and 44:
CKS 3 and 4 poles + m 10A - 400V en
Page 45 and 46:
CK...RY 3 and 4 poles + m 10A - 250
Page 47 and 48:
CD 7 poles + m 10A - 250V enclosure
Page 49 and 50:
CD 15 poles + m 10A - 250V enclosur
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
CD 128 poles + m 10A - 250V enclosu
Page 57 and 58:
CT - CTS inserts with incorporated
Page 59 and 60:
CT - CTS 64 poles + m 10A - 250V en
Page 61 and 62:
CDD 24 poles + m 10A - 250V enclosu
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
CDD 144 poles + m 10A - 250V enclos
Page 69 and 70:
CQ 12 poles + m coding positions fo
Page 71 and 72:
CQ 5 poles + m 16A - 230/400V enclo
Page 73 and 74:
CQ 4 poles (40A - 400/690V) + 2 pol
Page 75 and 76:
CDC 10 poles + m 16A - 250V enclosu
Page 77 and 78:
Page 79:
Page 82 and 83:
CQE 80 CQE 10 poles + m 16A - 500V
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
CSH 86 introduction As an improveme
Page 90 and 91:
CSH 88 CSH 6 poles + m 16A - 500V e
Page 92 and 93:
CSH 90 CSH 16 poles + m 16A - 500V
Page 94 and 95:
CSH 92 CSH 32 poles + m 16A - 500V
Page 96 and 97:
CCE 94 CCE 6 poles + m 16A - 500V e
Page 98 and 99:
CCE 96 CCE 10 poles + m 16A - 500V
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
JCNE - JCSE 106 enclosures: size
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
CNE...RY 112 CNE...RY 6 poles + m 1
Page 116 and 117:
CNE...RY 114 CNE...RY 16 poles + m
Page 118:
CNE...RY 116 CNE...RY 48 poles + m
Page 121 and 122:
CSS 10 poles + m 16A - 500V enclosu
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
CTE - CTSE - CT inserts with incorp
Page 129 and 130:
CTE - CTSE 10 poles + m 16A - 500V
Page 131 and 132:
CTE - CTSE 24 poles + m 16A - 500V
Page 133 and 134:
CT 10 poles + m 16A - 400V enclosur
Page 135 and 136:
CT 24 poles + m 16A - 400V enclosur
Page 137 and 138:
CME - CMSE 3 + 2 (aux) poles + m 16
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
CME 16 + 2 (aux) poles + m 16A - 40
Page 149:
CME 32 + 4 (aux) poles + m 16A - 40
Page 152 and 153:
CP 150 CP 12 poles + m 35A - 400/69
Page 154 and 155:
CX 152 CX 6 poles (40A - 690V) + 36
Page 156 and 157:
CX 154 CX 4 poles (80A - 690V) + m
Page 158 and 159:
MIXO 156 MIXO modular units for mul
Page 160 and 161:
MIXO 158 MIXO modular units for mul
Page 162 and 163:
MIXO 160 MIXO modular units 1 pole
Page 164 and 165:
MIXO 162 main features MIXO CX..G 1
Page 166 and 167:
MIXO 164 MIXO modular units 2 poles
Page 168 and 169:
MIXO main features MIXO CX 3/4 XD m
Page 170 and 171:
Page 172 and 173:
MIXO 170 main features MIXO CX 4 X
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
MIXO 176 MIXO modular units HT 2 po
Page 180 and 181:
Page 182 and 183:
MIXO 180 MIXO modular units 1 or 4
Page 184 and 185:
Page 186 and 187:
MIXO 184 MIXO modular units for 2 R
Page 188 and 189:
MIXO 186 MIXO modular units for 9-p
Page 190 and 191:
MIXO MIXO modular inserts for multi
Page 192 and 193:
MIXO 190 MIXO modular units for coa
Page 194 and 195:
MIXO 192 MIXO modular units accesso
Page 196 and 197:
MIXO 194 MIXO frames for modular un
Page 198 and 199:
C-TYPE - metallic - CLASS rotative
Page 200 and 201:
standards 198 ENCLOSURE CHARACTERIS
Page 202 and 203:
C-TYPE - grandezza 32.13 200 combin
Page 204 and 205:
C-TYPE - size 21.21 202 CK and MK e
Page 206 and 207:
C-TYPE - size 21.21 204 CK and MK e
Page 208 and 209:
C-TYPE - size 32.13 CQ enclosures s
Page 210 and 211:
C-TYPE - size 49.16 208 CZ and MZ e
Page 212 and 213:
Page 214 and 215:
Page 217 and 218:
CH - CA and MH - MA enclosures size
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
235
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
CQ and MQ - CZAC and CACsize “104
Page 245 and 246:
Page 247 and 248:
CH and MH enclosures size “77.62
Page 249 and 250:
CH and MH enclosures size “77.62
Page 251 and 252:
IP67
Page 253 and 254:
enclosures with IP67 V-Type closure
Page 255 and 256:
IP67 V-Type enclosure closing movem
Page 257 and 258:
C7 - C7A and M7 - M7A IP67 enclosur
Page 259 and 260:
C7 - C7A and M7 - M7A IP67 enclosur
Page 261 and 262:
accessories for multiple connectors
Page 263 and 264:
CV - CVA and MV - MVA enclosures si
Page 266 and 267:
V-TYPE - size 57.27 264 CV enclosur
Page 268 and 269:
V-TYPE - size 57.27 266 CV - CVA an
Page 270 and 271:
V-TYPE - size 77.27 268 CV enclosur
Page 272 and 273:
V-TYPE - size 77.27 270 CV - CVA an
Page 274 and 275:
V-TYPE - size 104.27 272 CV enclosu
Page 276 and 277:
V-TYPE - size 104.27 274 CV - CVA a
Page 280 and 281:
T-TYPE - overview 278 characteristi
Page 282 and 283:
T-TYPE - overview introduction New
Page 284 and 285:
T-TYPE - size 44.27 282 TC - TM enc
Page 286 and 287:
T-TYPE - size 77.27 284 TC - TM enc
Page 290 and 291:
JEI - size 44.27 288 JCV enclosures
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
JEI - size 104.27 294 JCV enclosure
Page 298 and 299:
BIG - overview BIG 296
Page 300 and 301:
BIG - overview BIG Enclosures The s
Page 302 and 303:
BIG - overview Simplified wiring Co
Page 304 and 305: BIG - overview Range The new items
Page 306 and 307: BIG - size 44.27 304 CB - MB BIG en
Page 318 and 319: BIG - size 104.27 316 CB - MB BIG e
Page 320 and 321: BIG - size 104.27 318 CB - MB BIG e
Page 322 and 323: V-TYPE - V-Type enclosures 320 C7 -
Page 325 and 326: enclosures for aggressive environme
Page 327 and 328: CK and MK enclosures size “21.21
Page 331 and 332: CH - CA and MH - MA enclosures size
Page 335 and 336: CH and MH enclosures size “77.62
Page 337 and 338: EMC connectors and electromagnetic
Page 347 and 348: CQ enclosures size “32.13” EMC
Page 349 and 350: CZ and MZ enclosures size “66.16
Page 353: CH - CA and MH - MA enclosures size
Page 361 and 362: characteristics Description CENTRAL
Page 363 and 364: CA and MA enclosures size “44.27
Page 372 and 373: IP68 - overview general characteris
Page 374 and 375: special enclosures 372 CG - MG encl
Page 394 and 395: 830V - size 57.27 392 CM - CMA and
Page 398 and 399: 396
Page 405 and 406:
CM - CMA and MM - MMA enclosures si
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
COB panel supports for multipole co
Page 413 and 414:
COB panel supports for multipole co
Page 415 and 416:
CZAC and CAC enclosures for special
Page 417 and 418:
CMAN enclosures enclosures for spec
Page 419 and 420:
CYG enclosures for special applicat
Page 421:
CYG special design enclosures enclo
Page 424 and 425:
accessories 422 complements and acc
Page 426 and 427:
accessories 424 accessories for mul
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
accessories 434 CR bridges for delt
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
accessories 442 CJ RJ45 connector A
Page 446 and 447:
accessories 444 adaptor inserts 1 s
Page 448 and 449:
accessories 446 adaptor inserts 1 s
Page 450:
attenuation 448 coaxial connectors
Page 453 and 454:
DESINA main features Hybrid socket
Page 455 and 456:
DESINA main features 1.6 Self-extin
Page 457 and 458:
DESINA feature of inserts for multi
Page 459 and 460:
CXL 2 pole fibre optics + 4 poles 1
Page 461 and 462:
CK and MK enclosures size “21.21
Page 463:
CK and MK enclosures size “21.21
Page 466 and 467:
crimping tools 464 tools and access
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
crimping tools tools and accessorie
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
load curves 492 limit current curve
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Part Nos. index 502 Part Nos. index
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Notes
show all

20111104_CN.12_complete_UK_LOW.pdf

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?