20111104_CN.12_complete_UK_LOW.pdf

MIXO modular units 2 poles 100A - 1000V
the modular inserts must be installed in suitable
frames which in turn are installed in traditional
housings * or COB panel support
frames for modular units * ............ page: 195
* enclosures: bulkhead mounting housings, high
construction housings or high construction hoods
modular units, 100A silver plated crimp contacts,
crimp connections PE adapter
description part No. part No.
without contacts (to be ordered separately)
- female inserts for female contacts ** CX 02 GF
- male inserts for female contacts ** CX 02 GM
100A female crimp contacts
16 mm 2 AWG 6 - 5 CGFA 16
25 mm 2 AWG 4 - 3 CGFA 25
35 mm 2 AWG 2 CGFA 35
100A male crimp contacts
16 mm 2 AWG 6 - 5 CGMA 16
25 mm 2 AWG 4 - 3 CGMA 25
35 mm 2 AWG 2 CGMA 35
cable earthing adapter 16 mm 2 (AWG 6 - 5) CGT 16
** on request, version with pole 3/4 numbering,
references: CX 02 GFN, CX 02 GMN
- characteristics according to EN 61984:
100A 1000V 8kV 3
100A 920/1600V 8kV 2
- certifications: cUL (UL for USA and Canada), CCC,
GL, GOST
- rated voltage according to UL/CSA: 600V
- insulation resistance: ≥ 10 GΩ
- ambient temperature limit: -40 °C ... +125 °C
- are made of self-extinguishing thermoplastic resin UL
94 V0
- mechanical life: ≥ 500 cycles
- contact resistance: ≤ 0.3 mΩ
- for contact crimping instructions, please see the
crimping tool section (100A contacts, CGF and CGM
series) on page 476
- for maximum current load, see the following load
curves inserts, for more information see page 499
working current (A)
140
120
100
80
60
40
20
diagram CX 02 poles (MIXO 100A)
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130
ambient temperature (°C)
dimensions shown are not binding
and may be changed without notice
dimensions in mm dimensions in mm
34 29.4
contacts side (front view)
side with reference arrow ▲
F
- footprint 2 modules
M
49
51
M
F
silver plated
CGF and CGM CGT 16
ø A
15.5
15.5
ø C
ø 8
37
ø C
ø B
39.5
8
ø 5.5
ø 4.6
15
26
CGF and CGM contacts
conductor conductor slot conductor
section ø A ø B ø C stripping lenght
(mm2 ) (mm) (mm) (mm) (mm)
16 5.5 5.5 13 15
25 7.0 7.0 13 15
35 7.9 8.2 12.5 15
How to use the PE adapter (CGT 16):
1) Strip 15 mm of flexible PE protective cable
2) Crimp the cable on the CGT 16 adapter by using the
CGPZ pliers with the CGD 16 C matrix
3) Fix the adapter tip in the larger earth terminal
(6 mm 2 ) of frames CX...TM/TF
4) To be used with bulkhead mounting housings or
high construction hoods
5) Cannot be used with T-TYPE series
163
MIXO