PCON-C/CG Controller Positioner Type - pulsar.com.tr
PCON-C/CG Controller Positioner Type - pulsar.com.tr
PCON-C/CG Controller Positioner Type - pulsar.com.tr
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.4 Heat Radiation and Installation<br />
Design the con<strong>tr</strong>ol panel size, con<strong>tr</strong>oller layout and cooling method in such a way that the temperature<br />
around the con<strong>tr</strong>oller will not exceed 40°C.<br />
Install the con<strong>tr</strong>oller vertically on a wall, as shown below. Since cooling is provided by way of natural<br />
convection, always observe this installation direction and provide a minimum clearance of 50 mm above<br />
and below the con<strong>tr</strong>oller to ensure sufficient natural airflows.<br />
When installing multiple con<strong>tr</strong>ollers side by side, providing a ventilation fan or fans above the con<strong>tr</strong>ollers<br />
will help maintain a uniform temperature around the con<strong>tr</strong>ollers.<br />
Keep the front panel of the con<strong>tr</strong>oller away from the wall (enclosure) by at least 95 mm.<br />
Fan<br />
50 mm or more<br />
95 mm<br />
or more<br />
50 mm or more<br />
Airflow<br />
Regardless of whether your system consists of a single con<strong>tr</strong>oller or multiple con<strong>tr</strong>ollers, provide sufficient<br />
clearances around each con<strong>tr</strong>oller so that it can be installed/removed easily.<br />
14
Change language