XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operator Cab<br />
<strong>XR1267</strong><br />
Operator Cab<br />
Warning<br />
A brief description of controls,<br />
indicators, and instruments is provided<br />
as a convenience for the operator.<br />
These descriptions DO NOT provide<br />
complete operation instructions. Read and understand<br />
the entire manual to prevent death, serious<br />
injury, or equipment damage.<br />
Figure 6-2. Ignition Switch.<br />
Ignition Switch<br />
A key is required to operate the Ignition switch.<br />
Accessory Outlet<br />
A 12 Volt accessory outlet is provided as a power source<br />
for personal items, such as a radio or cell phone.<br />
Figure 6-1. Key and Ignition Switch.<br />
The Ignition switch has four (4) positions: OFF, RUN,<br />
PREHEAT, and START.<br />
Position<br />
OFF<br />
RUN<br />
PREHEAT<br />
START<br />
Purpose<br />
Table 5. Ignition Switch<br />
Shuts down entire electrical system, except the horn<br />
and accessory outlet.<br />
All controls and indicators are operable.<br />
Use for cold starting conditions.<br />
Engages starter motor to crank engine.<br />
Figure 6-3. Accessory Outlet.<br />
Accelerator Pedal<br />
Press the accelerator pedal to increase engine speed. The<br />
accelerator pedal is spring-loaded to return to idle speed.<br />
NOTE: The PREHEAT and START positions are springloaded.<br />
When the key is released, the Ignition switch will<br />
automatically return to the RUN position.<br />
Figure 6-4. Accelerator Pedal.<br />
Page 34<br />
<strong>Xtreme</strong> <strong>Manufacturing</strong>, LLC