XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>XR1267</strong><br />
Operation<br />
6. Raise the quick attach lock lever.<br />
Figure 7-25. Raise Quick Attach Lock Lever.<br />
Figure 7-27. Make Sure Quick Attach Lock Lever Is Seated In Groove<br />
(A) of Quick Attach Pin.<br />
With lock lever raised, insert quick attach pin completely<br />
through the attachment and quick attach adapter.<br />
Warning<br />
Hydraulic attachments have a maximum<br />
hydraulic pressure rating. Failure to make<br />
sure the attachment is equipped with a<br />
pressure reducing valve, or is rated to<br />
be equal or slightly greater than 4,000 psi (276 bar),<br />
which is the maximum pressure of the forklift auxiliary<br />
hydraulic system at the quick-disconnect couplers,<br />
could result in death or serious injury.<br />
Make sure all hydraulic connections are tight (if<br />
equipped).<br />
9. Connect the quick attach couplers (this only applies<br />
to attachments with a quick attach hydraulic system).<br />
Figure 7-26. Insert Quick Attach Pin Through Attachment and Quick<br />
Attach Adapter.<br />
8. Release the quick attach lock lever and make sure<br />
it has lowered and seated itself in groove (A) of the<br />
quick attach pin.<br />
Figure 7-28. Connect Quick Attach Couplers.<br />
(A) Female Coupler. (B) Male Coupler.<br />
For information call (800) 497-1704 Page 61
Change language