XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operation<br />
<strong>XR1267</strong><br />
1. Position the forklift directly behind the attachment.<br />
NOTE: Allow enough distance to extend the boom<br />
approximately 18 to 20 inches (0.46 to 0.5 meters).<br />
Figure 7-21. Position Quick Attach Adapter In Line With Attachment.<br />
Figure 7-23. Raise Boom To Seat Pivot Pins (A) In Attachment<br />
Hooks (B).<br />
2. Tilt the quick attach adapter forward.<br />
3. Extend the boom and/or drive the forklift forward<br />
until pivot pins (A) are below and between the two (2)<br />
attachment hooks (B).<br />
5. Tilt the attachment up slightly. The quick attach<br />
adapter should be tight against the rear of the<br />
attachment. Align the holes between the quick attach<br />
adapter and attachment.<br />
Figure 7-22. Drive Vehicle Forward To Align Pivot Pins (A) With<br />
Attachment Hooks (B).<br />
4. Raise the boom until pivot pins (A) have seated fully in<br />
attachment hooks (B).<br />
Figure 7-24. Tilt Attachment To Align Holes Between Quick Attach<br />
Adapter and Attachment.<br />
(A) Not Aligned. (B) Aligned.<br />
Page 60<br />
<strong>Xtreme</strong> <strong>Manufacturing</strong>, LLC