XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>XR1267</strong><br />
Operator Cab<br />
Warning<br />
The reach forklift includes a Frame Sway<br />
Override switch. Improper use of the<br />
Frame Sway Override switch could cause<br />
death, serious injury, or property damage.<br />
Optional Controls and Indicators<br />
Two Wheel Rear (2WR) Steering Switch<br />
A Two Wheel Rear (2WR) Steering switch is used to engage<br />
and disengage the optional rear wheel steering feature.<br />
Figure 6-43. Two Wheel Rear (2WR) Steering Switch.<br />
Figure 6-41. Frame Sway Override Switch.<br />
The frame sway feature becomes locked and will not<br />
operate when the boom is raised 40° or more. Pressing<br />
the Frame Sway Override switch (the trigger) on the<br />
control handle will override the lockout feature and allow<br />
slow frame sway.<br />
Auxiliary Attachment Control<br />
Warning<br />
DO NOT change steering modes until the forklift slows<br />
or comes to a complete stop. Align all four (4) wheels<br />
perpendicular to the axle, before changing steering<br />
mode. Changing steering modes at higher travel<br />
speeds can make the forklift unstable, and cause a loss<br />
of control, which could result in death, serious injury,<br />
or property damage.<br />
The auxiliary attachment control lever controls the<br />
functions of approved optional attachments that can<br />
be mounted to the forklift and require hydraulic supply<br />
for operation.<br />
Figure 6-42. Auxiliary Attachment Control Lever.<br />
For information call (800) 497-1704 Page 45