XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
XR1267 - Xtreme Manufacturing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Lockout / Tagout<br />
<strong>XR1267</strong><br />
Lockout/Tagout Procedure<br />
Perform the following procedure to lockout and tagout<br />
the forklift. This procedure, requiring a lock, and danger<br />
tags are to be used whenever the forklift is unsafe for<br />
operation or maintenance.<br />
Removing Forklift From Service<br />
1. Attach “Do Not Operate” tags to steering wheel and<br />
ignition key.<br />
2. Pull back on both battery cover T-handles until they<br />
release from holders.<br />
3. Lower battery cover.<br />
4. Set battery disconnect switch to OFF.<br />
5. Lock battery disconnect switch.<br />
6. Attach “Do Not Operate” tag to battery disconnect<br />
switch.<br />
Do Not Operate Tag.<br />
Note: sample “Do Not Operate” tags are provided in the<br />
back of the manual.<br />
Figure 8-5. Battery Disconnect Switch.<br />
Warning<br />
If forklift is unsafe for operation or maintenance, the<br />
defect or defects must be clearly documented and<br />
posted in a conspicuous place on the forklift. Failure<br />
to comply could result in death, serious injury, or<br />
property damage.<br />
Returning Forklift To Service<br />
When the forklift has been repaired and made safe for<br />
operation and maintenance, perform the following<br />
procedure to return the forklift to service.<br />
1. Remove lock and “Do Not Operate” tag from battery<br />
disconnect switch.<br />
2. Raise and secure battery cover.<br />
3. Remove “Do Not Operate” tags from steering wheel<br />
and ignition key.<br />
Page 74<br />
<strong>Xtreme</strong> <strong>Manufacturing</strong>, LLC
Change language