XR1267 - Xtreme Manufacturing

Operator Cab
XR1267
Attachment Tilt Switch
The Attachment Tilt Switch located on the top of the
boom control handle controls attachment tilt functions.
Frame Sway Control Handle
The Frame Sway Control Handle installed on the side
console panel, controls frame sway functions.
Figure 6-40. Frame Sway Control Handle.
Figure 6-39. Attachment Tilt Switch.
(A) Attachment Tilt Down. (B) Attachment Tilt Up.
The Attachment Tilt Switch:
• Controls the attachment tilt functions by rolling the
switch forward and backward.
• Is a variable speed switch. Function speed is
proportional to how far the switch is rolled. The more
the switch is rolled in the appropriate direction, the
faster the corresponding function will occur.
Function
ATTACHMENT TILT DOWN
ATTACHMENT TILT UP
Table 8. Attachment Tilt Switch
Handle Action
Roll switch forward
(away from the operator).
Roll switch backward
(toward the operator).
NOTE: The attachment carriage will retain any set
angle throughout boom raising, lowering, retracting, or
extending operations.
The Frame Sway Control Handle:
• Controls the frame sway functions by moving the
control handle left and right.
• Is a variable speed control. Function speed is
proportional to control handle movement. The
more the control handle is moved in the appropriate
direction, the faster the corresponding function will
occur.
Function
FRAME SWAY RIGHT
FRAME SWAY LEFT
Table 9. Frame Sway Control Handle
Control Handle Action
Move Control Handle RIGHT.
Move Control Handle LEFT.
NOTE: Lock the frame sway by placing the travel
select lever in NEUTRAL or applying the service or parking
brake.
NOTE: Maximum frame sway is 16° overall or 8° each
direction, left and right.
Page 44
Xtreme Manufacturing, LLC