You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Using the Telephone<br />
18<br />
During a call:<br />
1. Press the key. To toggle between speakerphone mode on/off.<br />
2. Place the handset back in the base station/charger unit. The call will disconnect<br />
and go back to standby status.<br />
3. Press the key to end the call.<br />
Taking calls<br />
When an external call is received, all registered handsets ring and the LCD backlight<br />
will be on during ringing. The display shows Incoming call.<br />
The In-use / CID LED incoming call light on the base flashes.<br />
Note: If you have subscribed to caller ID, the caller's name or number will be shown<br />
(if available from the network).<br />
Handset is in the base station/charger (auto-answer):<br />
If auto-answer is set to on, the line will be automatically connected when you lift the<br />
handset from the base/charger.<br />
1. Lift the handset to answer the call.<br />
Note: If auto-answer is set to off, lift the handset and press the key or the key<br />
to answer the call.<br />
Handset is not in the base station/charger:<br />
1. Press the key or the key to answer the call.<br />
Prefix Dialling<br />
When prefix dialling is set to ON, the prefix number that you set will be dialled out<br />
first whenever you make an external call. The prefix can be a number up to 5 digits.<br />
You can use the prefix memory to store an area code that you frequently use, for<br />
example 0207 or 08457, to save you dialling it each time you make a call.
Change language