Policy Framework Configuration Guide - Juniper Networks

Junos 10.4 Policy Framework Configuration Guide
load-balance-group
Syntax load-balance-group group-name {
next-hop-group [ group-names ];
}
Hierarchy Level
[edit firewall]
Release Information Statement introduced before Junos OS Release 7.4.
Description
Configure a load-balance group.
Options
group-name—Name of load-balance group.
group-names—Name of next-hop groups to include in the load-balance group set.
Required Privilege
Level
Related
Documentation
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
• Configuring Load-Balance Groups on page 310
logical-bandwidth-policer
Syntax
logical-bandwidth-policer;
Hierarchy Level
[edit firewall policer policer-name],
[edit logical-systems logical-system-name firewall policer policer-name]
Release Information Statement introduced in Junos OS Release 8.2.
Logical systems support introduced in Junos OS Release 9.3.
Description
When you configure the policer rate limit as a percentage, specify that the percentage
be based on the shaping rate defined on the logical interface, rather than a percentage
of the media rate of the physical interface.
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring Bandwidth Policers on page 309
• Configuring Logical Bandwidth Policers
326
Copyright © 2010, Juniper Networks, Inc.