Policy Framework Configuration Guide - Juniper Networks

Chapter 16: Summary of Traffic Sampling, Forwarding, and Monitoring Configuration Statements
input
See the following sections:
• input (Forwarding Table) on page 417
• input (Port Mirroring) on page 417
• input (Sampling) on page 418
input (Forwarding Table)
Syntax
input filter-name;
Hierarchy Level
[edit forwarding-options family (inet | inet6 | mpls | vpls) filter],
[edit routing-instances routing-instance-name forwarding-options family (inet | inet6 | mpls
| vpls) filter]
Release Information Statement introduced before Junos OS Release 7.4.
Description
Apply a forwarding table filter to ingress traffic of the forwarding table.
Options
filter-name—Name of the applied filter.
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Applying Filters to Forwarding Tables on page 363
input (Port Mirroring)
Syntax input {
maximum-packet-length bytes;
rate number;
run-length number;
}
Hierarchy Level
[edit forwarding-options port-mirroring],
[edit forwarding-options port-mirroring instance instance-name]
Release Information Statement introduced before Junos OS Release 7.4.
maximum-packet-length option introduced in Junos OS Release 9.6 for M120 and M320
routers only.
Description
Configure input packet properties for port mirroring.
The statements are explained separately.
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring Port Mirroring on page 375
Copyright © 2010, Juniper Networks, Inc.
417