Policy Framework Configuration Guide - Juniper Networks

Junos 10.4 Policy Framework Configuration Guide
family multiservice
Syntax family multiservice {
destination-mac;
source-mac;
label-1;
label-2;
payload {
ip {
layer-3-only;
layer-3 {
(source-address-only | destination-address-only);
}
layer-4;
}
}
}
Hierarchy Level
[edit forwarding-options hash-key]
Release Information Statement introduced in Junos OS Release 8.0.
ip, label-1, label-2, layer-3-only, and payload statements introduced in Junos OS
Release 9.4.
layer-3, layer-. source-address-only, and destination-address-only statements introduced
in Junos OS Release 9.5.
Description (M Series, MX Series, and T Series routers only) Configure load balancing based on Layer 2
media access control information. On M120 and M320 routers only, configure VPLS load
balancing based on MPLS labels and IP information. On MX Series routers, configure
VPLS load balancing.
Options
destination-mac—Include the destination-address MAC information in the hash key.
source-mac—Include the source-address MAC information in the hash key.
label-1 (M120 and M320 routers only)—Include the first MPLS label in the hash key.
label-2 (M120 and M320 routers only)—Include the second MPLS label in the hash key.
payload (MX Series, M120, and M320 routers only)—Include the packets’ IP payload in
the hash key
ip (MX Series, M120, and M320 routers only)—Include the IP address of the IPv4 or IPv6
payload in the hash key.
layer-3-only (M120, and M320 routers only)—Include only the Layer 3 information from
the packets’ IP payload in the hash key.
layer-3 (MX Series routers only)—Include Layer 3 information from the packets’ IP payload
in the hash key.
400
Copyright © 2010, Juniper Networks, Inc.