Policy Framework Configuration Guide - Juniper Networks

CHAPTER 3
Routing Policy Configuration Statements
Configuring a Routing Policy
This section includes the following minimum configurations:
• Configuring a Routing Policy on page 35
• Minimum Routing Policy Configuration on page 36
• Minimum Routing Policy Chain Configuration on page 36
• Minimum Subroutine Configuration on page 37
To create a routing policy, you can include the policy-options statement in the
configuration:
policy-options {
as-path name regular-expression;
as-path-group group-name;
community name {
invert-match;
members [ community-ids ];
}
condition condition-name {
if-route-exists address table table-name;
}
damping name {
disable;
half-life minutes;
max-suppress minutes;
reuse number;
suppress number;
}
policy-statement policy-name {
term term-name {
from {
family;
match-conditions;
policy subroutine-policy-name;
prefix-list name;
route-filter destination-prefix match-type ;
source-address-filter source-prefix match-type ;
}
to {
Copyright © 2010, Juniper Networks, Inc.
35