Policy Framework Configuration Guide - Juniper Networks

Chapter 12: Summary of Firewall Filter and Policer Configuration Statements
three-color-policer (Configuring)
Syntax three-color-policer policer-name {
action {
loss-priority high then discard;
}
logical-interface-policer;
single-rate {
(color-aware | color-blind);
committed-information-ratebps;
committed-burst-sizebytes;
excess-burst-sizebytes;
}
two-rate {
(color-aware | color-blind);
committed-information-rate bps;
committed-burst-sizebytes;
peak-information-ratebps;
peak-burst-sizebytes;
}
}
Hierarchy Level
[edit firewall],
[edit logical-systems logical-system-name firewall]
Release Information Statement introduced before Junos OS Release 7.4.
action statement introduced in Junos OS Release 8.2.
Logical systems support introduced in Junos OS Release 9.3.
Description
Configure a three-color policer.
Options
policer-name—Name of the three-color policer. Reference this name when you apply the
policer to an interface.
The remaining statements are explained separately.
Required Privilege
Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Copyright © 2010, Juniper Networks, Inc.
339