RR-XS410 RR-XS400 - Panasonic
RR-XS410 RR-XS400 - Panasonic
RR-XS410 RR-XS400 - Panasonic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Setting the recording level manually<br />
The recording level can be adjusted automatically or manually on this unit. When the recording level<br />
adjustment is AUTO, the sound distortion is reduced by adjusting the recording level automatically. To<br />
record the original sound volume level faithfully such as an instrument playing and nature sound, set the<br />
recording level adjustment to MANUAL. (The factory setting is “AUTO”.)<br />
Setting the recording level<br />
adjustment to MANUAL<br />
• Press [g STOP/RETURN] to stop the unit.<br />
1 Press [MENU].<br />
2 Press +, – to select “MIC REC MENU”<br />
and press [q OK] to enter.<br />
3 Press +, – to select “REC LEVEL<br />
ADJ.” and press [q OK] to enter.<br />
4 Press +, – to select “MANUAL” and<br />
press [q OK] to enter.<br />
Adjusting the recording level<br />
manually<br />
• Set the recording level adjustment to MANUAL<br />
beforehand. (When the recording level<br />
adjustment is AUTO, the unit does not enter<br />
the recording standby.)<br />
1 Press and hold<br />
[* REC] for 1<br />
second or more.<br />
The unit enters the<br />
recording standby.<br />
g STOP/RETURN<br />
F2<br />
* REC<br />
VQT3T14<br />
22<br />
22<br />
To exit the setting screen, press<br />
[F2 (CLOSE)].<br />
The recording level is<br />
displayed.<br />
2 Aim the microphone at the sound<br />
source to record.<br />
3 Press u, i to adjust the<br />
recording level (➜ page 23).<br />
Adjustment range is 0 to 30.<br />
(The factory setting is “15”.)<br />
Pressing [* REC] starts recording.<br />
MENU
Change language