RR-XS410 RR-XS400 - Panasonic
RR-XS410 RR-XS400 - Panasonic
RR-XS410 RR-XS400 - Panasonic
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
VQT3T14<br />
34<br />
34<br />
Changing the playback speed<br />
The playback speed of MP3 files can be adjusted<br />
with 21 stages between slow playback (50%) and<br />
fast playback (200%). (For WMA files: 13 stages<br />
between 50% and 120%)<br />
The speed cannot be adjusted when PCM files are<br />
being played back. Playback is at 1x speed (100% ).<br />
1 Press [FAST] or [SLOW] during playback or<br />
while the unit is stopped.<br />
Each time you press the button, the playback speed<br />
becomes faster (FAST) or slower (SLOW).<br />
Status indication<br />
During playback,<br />
the playback speed<br />
is displayed.<br />
Playback speed:<br />
Playback speed can be adjusted by 10%-step for speed<br />
faster than 100% and by 5%-step for speed slower than<br />
100%.<br />
Status indication during playback:<br />
100% playback, playback faster than 100% and playback<br />
slower than 100% are displayed as “ ”, “ ” and “ ”<br />
respectively.<br />
* The speed cannot be adjusted for playback using folder<br />
cue (➜ page 42) or timer playback (➜ page 48).<br />
A-B Repeat play<br />
Playback repeats between the start point (A) and<br />
finish point (B) if those points are set.<br />
1 Press [A-B&] while playing.<br />
The start point (A) is set and<br />
“ ” (blinking) and “ ” are<br />
displayed.<br />
2 Press [A-B&] at the finish<br />
point (B).<br />
The display changes to “ ”<br />
(lighting) and repeat play starts.<br />
Cancelling A-B Repeat:<br />
Press [A-B&], u, i or [g STOP/RETURN].<br />
* You cannot set A-B Repeat when the time between the<br />
start point (A) and finish point (B) is approx. 2 seconds<br />
or less.<br />
* When only the start point (A) is set and playback continues<br />
until the end of the file, the end becomes the finish point<br />
(B) and A-B Repeat begins.<br />
* A-B Repeat by setting the range using 2 files is not<br />
possible.