H.264 Network DVR User Manual - Supercircuits Inc.

More documents

Recommendations

Info

SECTION 4: DVR SOFTWARE USAGE The RECORD TIMER submenu is used to setup a recording schedule that repeats weekly. • RECORD TIMER – Use the p and/or q buttons to change the setting (ON/OFF). When set to ON press ENTER to open the submenu for setting the record time. X axis Y axis Operation 0 ~ 24 hours. Each time interval within a square is two hours divided into four 30-minute segments. Sunday ~ Saturday Move to the start time point then press ENTER to set the starting time (marked in red color). Use p, q, t, or u to move forward in time to the ending time. Press ENTER again to mark the ending time (marked in yellow). Press MENU to exit. 18 www.supercircuits.com
SECTION 4: DVR SOFTWARE USAGE • DETECTION TIMER – Use the p and/or q buttons to change the setting (ON/OFF). When it is ON, press ENTER to open the submenu for setting detection sensing time. X axis Y axis Operation 0 ~ 24 hours. Each time interval within a square is two hours divided into four 30-minute segments. Sunday ~ Saturday Move to the start time point then press ENTER to set the starting time (marked in red color). Use p, q, t, or u to move forward in time to the ending time. Press ENTER again to set the ending time (marked in yellow). Press MENU to exit. 4.4.4 DATE In the QUICK START menu, go to the DATE icon to set the system date and time. This setting should only be made during initial setup of the DVR and after replacing the DVR battery. NOTE DO NOT change the date or time of your DVR after the recording function is activated. Since recorded data is time stamped, old data may become unusable. If the date or time is changed after recording is activated, clear all HDD data. H.264 Network DVR User Manual 19
Page 1 and 2: H.264 Network DVR User Manual Produ
Page 3 and 4: Table of Contents SECTION 1 Product
Page 5 and 6: TABLES OF CONTENTS SECTION 7 Specif
Page 7 and 8: SECTION 1: PRODUCT DESCRIPTION SECT
Page 9 and 10: SECTION 2: FRONT AND REAR PANEL CON
Page 11 and 12: SECTION 2: FRONT AND REAR PANEL CON
Page 13 and 14: SECTION 3: CONNECTIONS AND SETUP SE
Page 15 and 16: SECTION 3: CONNECTIONS AND SETUP >
Page 17 and 18: SECTION 3: CONNECTIONS AND SETUP >
Page 19 and 20: SECTION 3: CONNECTIONS AND SETUP iv
Page 21 and 22: SECTION 4: DVR SOFTWARE USAGE ADVAN
Page 23: SECTION 4: DVR SOFTWARE USAGE The Q
Page 27 and 28: SECTION 4: DVR SOFTWARE USAGE 4.4.5
Page 29 and 30: SECTION 4: DVR SOFTWARE USAGE CAMER
Page 31 and 32: SECTION 4: DVR SOFTWARE USAGE • S
Page 35 and 36: SECTION 4: DVR SOFTWARE USAGE NOTE
Page 37 and 38: SECTION 4: DVR SOFTWARE USAGE Subme
Page 39 and 40: SECTION 4: DVR SOFTWARE USAGE 4.6 S
Page 43 and 44: SECTION 4: DVR SOFTWARE USAGE 4.8 B
Page 45 and 46: SECTION 4: DVR SOFTWARE USAGE • C
Page 47 and 48: SECTION 5: BASIC OPERATION SECTION
Page 49 and 50: SECTION 5: DVR SOFTWARE USAGE —
Page 51 and 52: SECTION 6: LOCAL AND REMOTE OPERATI
Page 75 and 76:
SECTION 6: LOCAL AND REMOTE OPERATI
Page 77 and 78:
SECTION 6: LOCAL AND REMOTE OPERATI
Page 79 and 80:
SECTION 7: SPECIFICATIONS SECTION 7
Page 81 and 82:
APPENDIX A: D-SUB CONNECTOR PIN CON
Page 83 and 84:
APPENDIX A: D-SUB CONNECTOR PIN CON
Page 85 and 86:
APPENDIX C: COMPATIBLE HDD MODELS A
Page 87 and 88:
APPENDIX D: TROUBLESHOOTING FAQ Que
Page 89 and 90:
APPENDIX E: RS232 PROTOCOL Function
Page 91 and 92:
APPENDIX G: RECORDING TIME TABLE AP
show all

H.264 Network DVR User Manual - Supercircuits Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?