H.264 Network DVR User Manual - Supercircuits Inc.

More documents

Recommendations

Info

SECTION 4: DVR SOFTWARE USAGE 4.5 ADVANCE CONFIG NOTE The menu displays shown herein are for a 16-channel DVR. Displays for 8- and 4-channel units differ slightly. Press MENU and enter the password to open the QUICK START menu. Press the q button repeatedly to open the ADVANCE CONFIG menu. In the ADVANCED CONFIG menu, you can setup the CAMERA/ DETECTION/ALERT/NETWORK/SNTP/DISPLAY/RECORD/REMOTE configuration. 4.5.1 CAMERA menu In the CAMERA submenu, you can name the camera channel, adjust the video quality, and enable recording of the channel. 22 www.supercircuits.com
SECTION 4: DVR SOFTWARE USAGE CAMERA submenu items are described below. While changing the camera setting, you can see the affect on the camera image. • TITLE – The name of the camera channel. The default title is “CH” and the channel number. Move to the camera title you want to change. then press ENTER to open the character selection screen. Camera names can have up to six characters (alphanumeric characters and some symbols). • BRIG/CONT/SATU/HUE – Set the brightness/contrast/saturation/hue of each camera channel. The default value of CONT (contrast) is 098, all other settings default to 128. For each setting, the value is adjustable from 0 to 255. • COV – Set to ON to mask the channel when recording. When this function is active, COV (covert) is shown on the channel screen. • REC – set to ON to enable recording for the selected channel. When this function is active, the icon appears on the live channel screen. 4.5.2 DETECTION Move to DETECTION, then press ENTER to open the DETECTION submenu. This submenu includes: • TITLE – The name of the camera channel. This item can be set in the CAMERA submenu. • DET – Set to ON, or OFF to disable motion detection. • AREA – Press ENTER to select the detection area. You will see screens similar to the following. Pink blocks represent the area not being monitored; clear blocks represent areas monitored for motion detection. There are two different methods to set the detection area depending on the model you have. H.264 Network DVR User Manual 23
Page 1 and 2: H.264 Network DVR User Manual Produ
Page 3 and 4: Table of Contents SECTION 1 Product
Page 5 and 6: TABLES OF CONTENTS SECTION 7 Specif
Page 7 and 8: SECTION 1: PRODUCT DESCRIPTION SECT
Page 9 and 10: SECTION 2: FRONT AND REAR PANEL CON
Page 11 and 12: SECTION 2: FRONT AND REAR PANEL CON
Page 13 and 14: SECTION 3: CONNECTIONS AND SETUP SE
Page 15 and 16: SECTION 3: CONNECTIONS AND SETUP >
Page 17 and 18: SECTION 3: CONNECTIONS AND SETUP >
Page 19 and 20: SECTION 3: CONNECTIONS AND SETUP iv
Page 21 and 22: SECTION 4: DVR SOFTWARE USAGE ADVAN
Page 23 and 24: SECTION 4: DVR SOFTWARE USAGE The Q
Page 25 and 26: SECTION 4: DVR SOFTWARE USAGE • D
Page 27: SECTION 4: DVR SOFTWARE USAGE 4.4.5
Page 31 and 32: SECTION 4: DVR SOFTWARE USAGE • S
Page 33 and 34: SECTION 4: DVR SOFTWARE USAGE 4.5.4
Page 35 and 36: SECTION 4: DVR SOFTWARE USAGE NOTE
Page 37 and 38: SECTION 4: DVR SOFTWARE USAGE Subme
Page 39 and 40: SECTION 4: DVR SOFTWARE USAGE 4.6 S
Page 41 and 42: SECTION 4: DVR SOFTWARE USAGE 4.7.1
Page 43 and 44: SECTION 4: DVR SOFTWARE USAGE 4.8 B
Page 45 and 46: SECTION 4: DVR SOFTWARE USAGE • C
Page 47 and 48: SECTION 5: BASIC OPERATION SECTION
Page 49 and 50: SECTION 5: DVR SOFTWARE USAGE —
Page 51 and 52: SECTION 6: LOCAL AND REMOTE OPERATI
Page 79 and 80:
SECTION 7: SPECIFICATIONS SECTION 7
Page 81 and 82:
APPENDIX A: D-SUB CONNECTOR PIN CON
Page 83 and 84:
APPENDIX A: D-SUB CONNECTOR PIN CON
Page 85 and 86:
APPENDIX C: COMPATIBLE HDD MODELS A
Page 87 and 88:
APPENDIX D: TROUBLESHOOTING FAQ Que
Page 89 and 90:
APPENDIX E: RS232 PROTOCOL Function
Page 91 and 92:
APPENDIX G: RECORDING TIME TABLE AP
show all

H.264 Network DVR User Manual - Supercircuits Inc.

Create successful ePaper yourself

Delete template?

Save as template?