H.264 Network DVR User Manual - Supercircuits Inc.
H.264 Network DVR User Manual - Supercircuits Inc.
H.264 Network DVR User Manual - Supercircuits Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SECTION 4: <strong>DVR</strong> SOFTWARE USAGE<br />
The submenu items are described below:<br />
• EXT. ALERT – Select ON or OFF to enable or disable a sound when any external alarm is triggered.<br />
• INT. BUZZER – Select ON or OFF to enable or disable a sound for all internal conditions: KEY,<br />
VLOSS, MOTION BUZZER, and ALARM. When INT. BUZZER is ON, KEY BUZZER, VLOSS BUZZER,<br />
MOTION BUZZER, and ALARM BUZZER can individually be set to ON or OFF.<br />
——<br />
KEY BUZZER – Set ON or OFF to enable or disable a sound when pressing the buttons on the<br />
front panel.<br />
——<br />
VLOSS BUZZER – Set ON/OFF to enable/disable a sound when video loss happened.<br />
——<br />
MOTION BUZZER – Set ON/OFF to enable/disable a sound when any motion alarm is sensed.<br />
——<br />
ALARM BUZZER – Set ON/OFF to enable/disable a sound when any internal alarm is sensed.<br />
——<br />
HDD BUZZER – Set ON/OFF to enable/disable a sound when the HDD remaining capacity<br />
reaches to the value set in HDD NEARLY FULL (GB).<br />
——<br />
ALARM DURATION (SEC) – Press the p and/or q buttons to set the duration time of alarm<br />
recording in second (5/10/20/40).<br />
——<br />
HDD NEARLY FULL (GB) – If HDD BUZZER is ON, press the p and/or q buttons to select<br />
the HDD free space threshold at which the alert will occur. Values are 5, 10, 15, or 20 GB.<br />
4.5.4 <strong>Network</strong><br />
Use this menu to setup network TCP/IP parameters. Move to NETWORK then press ENTER to open<br />
the submenu. The NETWORK screen shows the current network settings. Submenus show parameters<br />
relevant to the NETWORK TYPE selected. Options are STATIC, DHCP, or PPOE.<br />
26 www.supercircuits.com