INSTRUCTIONS - Olympus
INSTRUCTIONS - Olympus
INSTRUCTIONS - Olympus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 2 Instrument Nomenclature and Specifications<br />
Medical Device<br />
Directive<br />
This device complies with the requirements<br />
of Directive 93/42/EEC concerning medical<br />
devices. Classification: Class II a<br />
EMC<br />
Applied standard;<br />
IEC 60601-1-2: 2001<br />
This instrument complies with the<br />
standards listed in the left column.<br />
CISPR 11 of emission:<br />
Group 1, Class B<br />
Year of<br />
manufacture<br />
Degree of<br />
protection<br />
against<br />
electric shock<br />
2512345<br />
This instrument complies with the EMC<br />
standard for medical electrical equipment;<br />
edition 2 (IEC 60601-1-2: 2001). However,<br />
when connecting to an instrument that<br />
complies with the EMC standard for<br />
medical electrical equipment; edition 1<br />
(IEC 60601-1-2: 1993), the whole system<br />
complies with edition 1.<br />
The last digit of the year of manufacture is<br />
the second digit of the serial number.<br />
TYPE BF applied part<br />
2.4 Attaching the chain for water-resistant cap<br />
(MAJ-1119)<br />
• Do not lift the endoscope by the chain for water-resistant cap.<br />
Otherwise, operator and/or patient injury can result, or the<br />
endoscope and/or water-resistant cap may be damaged<br />
when fitting part comes off from the S-cord connector mount.<br />
• Do not connect the fitting part to any mount but the S-cord<br />
connector mount. Connecting the fitting part to suction<br />
connector may cause unreliable connection of the suction<br />
tube to the suction connector. It may also cause departing of<br />
the suction tube from the endoscope and the patient debris to<br />
spray.<br />
EVIS LUCERA GIF TYPE 2TQ260M OPERATION MANUAL<br />
19