INSTRUCTIONS - Olympus
INSTRUCTIONS - Olympus
INSTRUCTIONS - Olympus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 3 Preparation and Inspection<br />
Attaching the biopsy valve<br />
If a biopsy valve is not properly connected to instrument<br />
channel port, it can reduce the efficacy of the endoscope’s<br />
suction system and may cause patient debris to leak or spray<br />
from the endoscope.<br />
Attach the biopsy valve to the instrument channel ports of the endoscope as<br />
shown in Figure 3.12. Confirm that the biopsy valve fits properly.<br />
Biopsy valve<br />
Instrument channel ports<br />
Figure 3.12<br />
• Biopsy valve MAJ-419 should be used with this endoscope.<br />
• Biopsy valve MB-358 can be also used, but the aspiration is<br />
performed through only one (“A” channel) of both instrument<br />
channels.<br />
EVIS LUCERA GIF TYPE 2TQ260M OPERATION MANUAL<br />
35