INSTRUCTIONS - Olympus
INSTRUCTIONS - Olympus
INSTRUCTIONS - Olympus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2 Instrument Nomenclature and Specifications<br />
2. Align the notch on the connecting plate with the pin on the venting connector<br />
of the water-resistant cap (MH-553, see Figure 2.2).<br />
3. Insert the connecting plate to the venting connector (see Figure 2.2).<br />
4. Confirm that the connecting plate is reliably inserted to the foot of the<br />
venting connector and can be smoothly rotated.<br />
5. Insert the hole on the fitting part to the S-cord connector mount of the<br />
endoscope connector (see Figure 2.3).<br />
6. Confirm that the fitting part is reliably inserted to the foot of the S-cord<br />
connector mount and can be smoothly rotated.<br />
Connecting plate<br />
Notch<br />
Pin<br />
Venting connector<br />
Water-resistant cap<br />
Figure 2.2<br />
Fitting part<br />
Hole<br />
S-cord connector<br />
mount<br />
Figure 2.3<br />
After this page, detaching condition of the chain for<br />
water-resistant cap (MAJ-1119) is explained.<br />
EVIS LUCERA GIF TYPE 2TQ260M OPERATION MANUAL<br />
21