You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4. Playing back the demo project<br />
The MR-1 contains a high-quality demo project that was recorded in DFF(DSDIFF) format.<br />
Here's how to play back this project.<br />
What is a project?<br />
When you record on the MR-1, two files are created; an audio file and a project file (containing<br />
protection data and markers, etc.). These two files are collectively called a "project," and<br />
can be operated on the MR-1 as if they were a single audio file. (→p.44 "Hard disk structure<br />
and files")<br />
Playing back<br />
When you've turned on the power, make sure that the demo project name is shown in the<br />
upper part of the level meter screen, and press the play/pause button.<br />
The demo project recorded on the MR-1 will play back.<br />
Project Name<br />
If something other than the demo project is shown, select the demo project as described in "Selecting<br />
and playing back a project/file" (p.18).<br />
Pausing<br />
During playback, press the play/pause button to pause at that location. When you press the<br />
play/pause button once again, playback will resume from that location.<br />
Stopping playback<br />
During playback, press the stop button.<br />
If you then press the play/pause button, playback will start from the beginning of the currently<br />
selected project/file.<br />
Searching for a desired location during playback<br />
During playback, you can hold down the rewind button to rewind while listening to the sound.<br />
You can hold down the fast-forward button to fast-forward while listening to the sound.<br />
If you assign marks to a project, you'll be able to move quickly to a desired point (→p.21).<br />
13
Change language