Download User Manual - Y3k.com

X4D1/X8D1/X16D1 User Manual
4.8 P.T.Z Configuration
P.T.Z configuration includes two submenus: “Serial Port”and “Advanced”
Setting up Serial Port:
o Step 1:Go to Main Menu > Setup >P.T.Z >Serial Port (tab) (refer to Fig 4-42):
Fig 4-42
o
o
o
o
Step 2:Select the relevant cameras that you want enabled for P.T.Z.
Step 3:Setup the corresponding P.T.Z details for each selected camera including the Address (i.e. Camera ID), Baud
Rate and Protocol.
Step 4: Users can setup all channels with same parameters by selecting the “All”check-box and then the relevant P.T.Z
settings.
Step 5: Click “Apply” to save any changes
70