21.04.2014 Views

1 Überschrift 1 - Audio Intervisual Design, Inc.

1 Überschrift 1 - Audio Intervisual Design, Inc.

1 Überschrift 1 - Audio Intervisual Design, Inc.

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

• Water cooling<br />

• Lamphouse<br />

- up to 2000 W<br />

- up to 7000 W<br />

• SONY 9-pin remote interface<br />

• VSU 35 video scanning unit<br />

• Reader for DOLBY / DTS / SDDS<br />

• Film cleaner<br />

• Operating manuals<br />

NOTE<br />

For further information about accessories please contact your local dealer or look in<br />

our website www.kinoton.com.<br />

2.3 Installation<br />

NOTE<br />

The projector will be delivered completely wired and factory-tested.<br />

ATTENTION<br />

• Make sure that electric lines are not damaged or squeezed during<br />

transportation.<br />

• Only use suitable hoisting machines (portal crane, fork-lift, truck).<br />

• Do not use unit parts as climbing aid.<br />

• Electric lines have to be in accordance with local regulations and be laid<br />

professionally.<br />

2.3.1 Place of Installation, Place of Operation<br />

The place on which unit will be installed must be even, solid and clean.<br />

In figure 2-1 you see the requirement of the projector.<br />

2.3.2 Unpacking and Installation<br />

• Remove wooden box around projector (if necessary).<br />

• Transport projector on pallet with a suitable hoisting machine to the place of<br />

installation.<br />

• Release projector from pallet (release screws).<br />

• Lift up projector from pallet and remove pallet.<br />

• Place projector on its pedestals to the place of installation.<br />

• Line up projector. The pedestals are adjustable and have a variable projection<br />

angle of ±6°.<br />

2-8<br />

Issue: 10/2003

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!